900-F-S-5
PCB Tab Connector
Tab 2x 2.8 mm / 1x 6.3 mm, with pegs
DESCRIPTION
The tab connector 900-F-S-5 with a pitch of 5 mm is a raised 900-S-5 version and designed for tab receptacles of 1x 2.8 mm or 1x 6.3 mm. The tab connector housing of series 900-F was raised for this special variant. The enormous variety of different tab connector designs and their mixed mounting increase the versatility of this series. When potting the tab connector moulding, the casting resin can penetrate between the raised feet from below without affecting the blade connection area. Depending on the respective application, the series 900-F allows to plug in bare, partially or fully insulated tab receptacles according to DIN 46247. Also non-insulated 2.8 mm or 6.3 mm tab receptacles can be plugged on these tab connectors. Insulation receptacles ISO-25 (see also ISO product data sheet) can be used to insulate 2.8 mm or 6.3 mm tab receptacles. Insulation sockets are available for 6.3 mm tab connectors with double-spring contacts (see also ISO-900 product data sheet).
GENERAL INFORMATION
Pitch: 5.00 mm
No. of poles: 2 - 25
TECHNICAL DATA
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
320 V
320 V
630 V
Rated Impulse Voltage
4 kV
4 kV
4 kV
Rated current: 6 A: with receptacles 2.8; wire 1 mm² (16 AWG)16 A: with receptacles 6.3; wire 2.5 mm² (14 AWG)
Rated insulation voltage: 450 V acc. to EN 60998-1
Hole in PCB: ø 1.6 mm
Other specifications: Indicated rated voltages refer to applications with insulation receptacles
RATINGS
|
Current [A] |
Voltage [V] |
Group |
AWG |
Torque [Nm] |
|
|---|---|---|---|---|---|
|
15 | 150 | B |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, grey, V-0
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 100°C
Solder pin: 1,0 x 0,8 mm; tin plated brass
Tab: 2,8 x 0,8 mm; 6,3 x 0,8 mm; tin plated brass
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-5,00
- Insulation receptacles ISO
- Insulation sockets ISO-900
- Change of pitch
- Component mix of tab connector versions
- Tab connectors are also individually available (see single tabs GST-900)
