900-W-7.5

PCB Tab Connector

Tabs with 90° angle

https://wecoconnectors.com/wp-content/uploads/Images/900-W-7.5-R.JPG

DESCRIPTION

The tab connector 900-W-7,5 with double solder termination and a pitch of 7,5 mm is designed for 1x 2,8 mm and 1x 2,8 mm / 1x 6,3 mm tab connector receptacles. Depending on the respective application, the tab connectors of series 900 allow to plug in bare, partially or fully insulated tab receptacles according to DIN 46247. A non-insulated 2,8 mm or a 6,3 mm (optionally also insulated) tab connector receptacle can be plugged in the angled plug-in area of the tab connector. To the vertical tab connector, a non-insulated 2,8 mm tab connector receptacle can be also be connected. Insulation receptacles ISO-25 and ISO-250 (see also ISO product data sheet) can be used to insulate 6,3 mm tab receptacles.

GENERAL INFORMATION

Pitch: 7.50 mm

No. of poles: 2 - 17

TECHNICAL DATA

Over Voltage Category

III

III

II

Pollution Severity Level

3

2

2

Rated Voltage

500 V

630 V

1000 V

Rated Impulse Voltage

6 kV

6 kV

6 kV

Rated current: 6 A: with receptacles 2.8; wire 1 mm² (16 AWG)16 A: with receptacles 6.3; wire 2.5 mm² (14 AWG)

Rated insulation voltage: 750 V acc. to EN 60998-1

Hole in PCB: ø 1.6 mm

Other specifications: Indicated rated voltages refer to applications with insulation receptacles

RATINGS

Current
[A]
Voltage
[V]
Group
 
AWG
 
Torque
[Nm]
15 300 B
15 150 C
15 300 B
10 300 D, E
Download PDF

TECHNICAL DRAWINGS

900-W-7.5.JPG - technical drawing 1

MATERIALS

Moulding: PA, red, V-0

Comparative tracking index: CTI ≥ 600

Insulating group: I

Temperature range: -40°C up to 100°C

Solder pin: 1.0 x 0.8 mm; tin plated brass

Tab: 2.8 x 0.8 mm; 6.3 x 0.8 mm; tin plated brass

OPTIONS / ACCESSORIES

  • Consecutive numbering
  • Special marking according to drawing
  • Self-adhesive marking strip BST-7,50
  • G30: Gold Plating (30 micro inches)
  • Change of pitch
  • Component mix of tab connector versions
  • Tab connectors are also individually available (see single tabs GST-900)

STANDARD CONFIGURATIONS

Poles Items Part # Length L [mm] Step 3D PDF
02 900-W-7.5/02 27.870.903 11.00
03 900-W-7.5/03 27.870.904 18.50
04 900-W-7.5/04 27.870.906 26.00
05 900-W-7.5/05 27.870.907 33.50
06 900-W-7.5/06 27.870.909 41.00

Did you find the information you were looking for ?

Click on a star to rate your experience.

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.