960-T (-DS)

PCB Connector

Screw connection, dovetail version

https://wecoconnectors.com/wp-content/uploads/Images/960-T-R.JPG

DESCRIPTION

The PCB connector 960-T with a pitch of 5,08 mm is available in 2 and 3 poles and can be mounted side-by-side without pole loss. Compared to the smaller PCB connector 940-T, it has a larger clamping range and larger clearance and creepage distances. Lateral latching elements on the housing allow to latch the PCB connector to longer terminal strips without pole loss. Wire protection in DS-design reliably prevents damage to stranded wires by the screw. The screws are secured against self-loosening. For the grid connection, these PCB connectors are equipped with a M3 thread.

GENERAL INFORMATION

Pitch: 5.08 mm

No. of poles: 2 + 3

TECHNICAL DATA

Clamping Range:

solid / flexible / AWG

without wire protector

1 - 6 mm² / 1 - 2.5 mm² / 16 - 12 AWG

with wire protector:

0.75 - 4 mm² / 0.75 - 2.5 mm² / 18 - 12 AWG

Rated cross section: 2.5 mm²

Wire stripping length: 6.5 mm ± 0.5 mm

Over Voltage Category

III

III

II

Pollution Severity Level

3

2

2

Rated Voltage

250 V

320 V

630 V

Rated Impulse Voltage

4 kV

4 kV

4 kV

Rated current: 24 A

Rated insulation voltage: 250 V acc. to EN 60998-1

Hole in PCB: ø 1.3 mm

Torque: 0.5 Nm

RATINGS

Current
[A]
Voltage
[V]
Group
 
AWG
 
Torque
[Nm]
20 300 B 22-12 [1] 0.51
10 300 D 22-12 [1] 0.51
20 300 B 26 - 12 0.51
10 300 D, E 26 - 12 0.51
Current
[A]
Voltage
[V]
Cross Section
[mm2]
AWG
 
TORQUE
 
24 400 2.5
Download PDF

TECHNICAL DRAWINGS

960-T.JPG - technical drawing 1

MATERIALS

Moulding: PA, grey, V-0

Comparative tracking index: CTI ≥ 600

Insulating group: I

Temperature range: -40°C up to 100°C

Terminal body: Tin plated brass

Screw: M3; zinc plated steel, blue passivated

Solder pin: ø 1 mm; tin plated copper alloy

Wire protector: Tin plated tin bronze

OPTIONS / ACCESSORIES

  • Consecutive numbering
  • Special marking according to drawing
  • Self-adhesive marking strip BST-5,08
  • Longer solder pins up to 95 mm
  • Version with extended wire entrance
  • Double wire protector as bridge

Notes

STANDARD CONFIGURATIONS

Poles Items Part # Items Part # Length L [mm] Step 3D PDF
02 960-T/02 10.878.602 960-T-DS/02 20.878.602 11.16
03 960-T/03 10.878.603 960-T-DS/03 20.878.603 16.24

Did you find the information you were looking for ?

Click on a star to rate your experience.

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.