970-NFBW (-DS)

Plug Connector

Screw connection, with interlocking tabs

https://wecoconnectors.com/wp-content/uploads/Images/970-NFBW-R.JPG

DESCRIPTION

The PCB plug connector 970-NFBW with a pitch of 5 mm is available in 2- to 12-pole design and can be mounted side-by-side without pole loss. The connector can be plugged on pin strips, such as the 971-SLW series. The long ribs of the pin strip offer optimum supporting surface for the socket terminal strip. The 970-NFBW series has an additional rear latch nose. Plugging the 970-NFBW series on the mating pin strip 971-FBWP provides a vibration-proof connection. The screws are secured against self-loosening.

GENERAL INFORMATION

Pitch: 5.00 mm

No. of poles: 2 - 12

Usable with: plugs with 971-FBWP, SLW series, single pins LST-1.3-6.5

TECHNICAL DATA

Clamping Range:

solid / flexible / AWG

without wire protector

1 - 6 mm² / 1 - 4 mm² / 16 - 10 AWG

with wire protector:

0.75 - 4 mm² / 0.75 - 2.5 mm² / 18 - 12 AWG

Rated cross section: 2.5 mm²

Wire stripping length: 5.5 mm ± 0.5 mm

Over Voltage Category

III

III

II

Pollution Severity Level

3

2

2

Rated Voltage

250 V

320 V

630 V

Rated Impulse Voltage

4 kV

4 kV

4 kV

Rated current: 6 A

Rated insulation voltage: 250 V acc. to EN 60998-1

Torque: 0.5 Nm

RATINGS

Current
[A]
Voltage
[V]
Group
 
AWG
 
Torque
[Nm]
20 300 B 22-12 [1] 0.51
10 300 D 22-12 [1] 0.51
20 300 B 26 - 12 0.4
10 300 D, E 26 - 12 0.4
Current
[A]
Voltage
[V]
Cross Section
[mm2]
AWG
 
TORQUE
 
13.5 250 2.5
Download PDF

TECHNICAL DRAWINGS

970-NFBW.JPG - technical drawing 1

MATERIALS

Moulding: PA, grey, V-0

Comparative tracking index: CTI ≥ 600

Insulating group: I

Temperature range: -40°C up to 100°C

Terminal body: Tin plated brass

Spring: Stainless strip steel

Screw: M3; zinc plated steel, blue passivated

Wire protector: Tin plated tin bronze

OPTIONS / ACCESSORIES

  • CN: Consecutive Numbering
  • SM: Special Marking (please provide sketch)
  • G05: Gold Plating (5 micro inches)
  • G30: Gold Plating (30 micro inches)
  • S30: Silver Plating (30 micro inches)
  • Self-Adhesive marking strip BST-5.00
  • Version with 10 mm spacing
  • 970-J1, Jumper
  • Double wire protector as bridge

Notes

STANDARD CONFIGURATIONS

Poles Items Part # Items Part # Length L [mm] Step 3D PDF
02 970-NFBW/02 30.873.142 970-NFBW-DS/02 40.873.142 10.00
03 970-NFBW/03 30.873.143 970-NFBW-DS/03 40.873.143 15.00
04 970-NFBW/04 30.873.144 970-NFBW-DS/04 40.873.144 20.00
05 970-NFBW/05 30.873.145 970-NFBW-DS/05 40.873.145 25.00
06 970-NFBW/06 30.873.146 970-NFBW-DS/06 40.873.146 30.00

Did you find the information you were looking for ?

Click on a star to rate your experience.

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.