978-TY (-DS)

PCB Connector

Screw connection, 2 solder pins per pole, dovetail version, enlarged clamping area

https://wecoconnectors.com/wp-content/uploads/Images/978-TY-R.JPG

DESCRIPTION

The PCB connector 978-TY with larger conductor space and a pitch of 5 mm is available in 2- and 3-pole design. Equipped with two solder pins per pole, these PCB connectors offer a tighter fit on the PCB, particularly at smaller pole numbers, and also feature higher non-twist reliability when connecting the terminal lead. Lateral latching elements on the housing allow to latch the PCB connector to longer terminal strips without pole loss. The wire protector of the “DS”-version reliably prevents damage to multi-wire flexible conductors by the turning screw. The wire entrance is parallel to the PCB. The screws are secured against self-loosening. For the grid connection, these PCB connectors are equipped with a M3 thread.

GENERAL INFORMATION

Pitch: 5.00 mm

No. of poles: 2 + 3

TECHNICAL DATA

Clamping Range:

solid / flexible / AWG

without wire protector

0.75 - 6 mm² / 0.75 - 4 mm² / 18 - 10 AWG

with wire protector:

0.34 - 6 mm² / 0.34 - 4 mm² / 22 - 10 AWG

Rated cross section: 2.5 mm²

Wire stripping length: 6.5 mm ± 0.5 mm

Over Voltage Category

III

III

II

Pollution Severity Level

3

2

2

Rated Voltage

250 V

320 V

630 V

Rated Impulse Voltage

4 kV

4 kV

4 kV

Rated current: 24 A

Hole in PCB: ø 1.3 mm

Torque: 0.5 Nm

RATINGS

Current
[A]		 Voltage
[V]		 Group
 		 AWG
 		 Torque
[Nm]
20 300 B 22-12 [1] 0.51
10 300 D 22-12 [1] 0.51
20 300 B 26 - 12 0.51
10 300 D, E 26 - 12 0.51
Current
[A]		 Voltage
[V]		 Cross Section
[mm2]		 AWG
 		 TORQUE
 
24 400 4.0
Download PDF

TECHNICAL DRAWINGS

978-TY.JPG - technical drawing 1

MATERIALS

Moulding: PA, grey, V-0

Comparative tracking index: CTI ≥ 600

Insulating group: I

Temperature range: -40°C up to 100°C

Terminal body: Tin plated brass

Screw: M3; zinc plated steel, blue passivated

Solder pin: ø 1 mm; tin plated copper

Wire protector: Tin plated tin bronze

OPTIONS / ACCESSORIES

  • Consecutive numbering
  • Special marking according to drawing
  • Self-adhesive marking strip BST-5,00
  • Longer solder pins up to 95 mm
  • Version with extended wire entrance
  • Double wire protector as bridge

Notes

STANDARD CONFIGURATIONS

Poles Items Part # Items Part # Length L [mm] Step 3D PDF
02 978-TY/02 30.872.622 978-TY-DS/02 40.872.622 10.00
03 978-TY/03 30.872.623 978-TY-DS/03 40.872.623 15.00

Did you find the information you were looking for ?

Click on a star to rate your experience.

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.