983-FS

Tab/Screw Connector Block

Tab/screw connection, 1 solder pin per pole

https://wecoconnectors.com/wp-content/uploads/Images/983-FS-R.JPG

DESCRIPTION

On the input side, each pole of the tab connector 983-FS in 10 mm pitch can be connected to up to 6 tab connections or one screw connection. For a uniform assembly, version, assembly type (4-digit number) and number of poles must be specified. Both technical drawings (A and B) show an example for uniform assembly. Mixed assembly requires either specifications of the terminal design for each pole or a drawing. Due to the multitude of assembly combinations there is no designated order code. For uniform assembly with screw connections (8.190) see tab connector strip 983-S.

GENERAL INFORMATION

Pitch: 10.00 mm

No. of poles: 2 - 26

TECHNICAL DATA

Clamping Range:

solid / flexible / AWG
0.5 - 2.5 mm² / 0.5 - 2.5 mm² / 20 - 12 AWG

Rated cross section: 2.5 mm²

Wire stripping length: 8.5 mm

Over Voltage Category

III

Pollution Severity Level

3

Rated Voltage

320 V

Rated Impulse Voltage

4 kV

Rated current: 16 A: with receptacles 4.8; wire 2.5 mm² (14 AWG)

Rated insulation voltage: 450 V acc. to EN 60998-1

Hole in PCB: ø 1.6 mm

Torque: 1.2 Nm

Other specifications: For screw connections, 2 wires of the same cross-section can be connected per pole. The specified rated voltage applies to applications with insulating receptacles.

RATINGS

Current
[A]
Voltage
[V]
Group
 
AWG
 
Torque
[Nm]
15 300 B 20 - 12
15 300 B 20 - 12
10 300 D, E 20 - 12
Download PDF

TECHNICAL DRAWINGS

983-FS.JPG - technical drawing 1

MATERIALS

Moulding: PA, grey, V-0

Comparative tracking index: CTI ≥ 600

Insulating group: I

Temperature range: -40°C up to 100°C

Pressure clamp: Tin plated brass

Screw: M4; zinc plated steel, blue passivated

Solder pin: 0,8 x 1,0 mm; tin plated brass

Tab: Nickel plated brass

OPTIONS / ACCESSORIES

  • Consecutive numbering
  • Special marking according to drawing
  • Self-adhesive marking strip BST-10,00
  • Cover cap 983-A (two unassigned poles required); not suitable for every assembly type
  • Crosshead screws
  • 10 mm pin length
  • Version without solder pin
  • Version with screw connections only, please see 983-S

STANDARD CONFIGURATIONS

Poles Items Part # Length L [mm] Step 3D PDF

Did you find the information you were looking for ?

Click on a star to rate your experience.

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.