120-M-227-SMD
Header
Vertical plug-in, with anchors
DESCRIPTION
120-M-227-SMD is a pin strip with a pitch of 5 mm for surface mount technology and suitable for all plugs of the plug connector system of series of 120 and available in lengths from 2 to 22 poles. The solder retention devices (SMT anchors) on either side of the terminal housing provide an exceptionally high retention force for the terminal block to the PCB. The most significant benefit of this design is the protection it provides to the solder joints against stresses encountered in field-installations. The product eliminates completely CTE mismatch (Coefficient of thermal expansion) and provide total coplanarity by the position adapting pins. For the automatic assembling process, all pin strip versions are packed Tape on Reel and are equipped with high temperature resistant pick caps, which can comfortably be removed after the soldering process. Plug-In direction vertical to PCB and wire entrance parallel to PCB when plugged with 120-D-111, 120-D-121 Plug-In direction and wire entrance vertical to PCB when plugged with 120-A-111.
GENERAL INFORMATION
TECHNICAL DATA
Over Voltage Category
IIII
III
II
Pollution Severity Level
3
2
2
Rated Voltage
160 V
160 V
250 V
Rated Impulse Voltage
2.5 kV
2.5 kV
2.5 kV
Rated current: 12 A
Soldering Process: Reflow solder
Rated insulation voltage: 130 V acc. to EN 60998-1
RATINGS
|
Current [A] |
Voltage [V] |
Group |
AWG |
Torque [Nm] |
|
|---|---|---|---|---|---|
|
15 | 300 | B | ||
| 10 | 300 | D | |||
|
15 | 300 | B | ||
| 10 | 300 | D, E |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA HT, grey, V-0
Comparative tracking index: CTI 250
Insulating group: IIIa
Temperature range: -40°C up to 105°C; reflow solder temperature (Peak) max. 250°C (15-30 s)
Solder pin: ø 1,1 mm (plug-in area); tin plated brass
OPTIONS / ACCESSORIES
- CN: Consecutive Numbering
- SM: Special Marking (please provide sketch)
- G05: Gold Plating (5 micro inches)
- G30: Gold Plating (30 micro inches)
- S30: Silver Plating (30 micro inches)
- Self-Adhesive marking strip BST-5.00[1]
