120-M-227-SMD

Header

Vertical plug-in, with anchors

https://wecoconnectors.com/wp-content/uploads/Images/120-M-227-SMD-R.JPG

DESCRIPTION

120-M-227-SMD is a pin strip with a pitch of 5 mm for surface mount technology and suitable for all plugs of the plug connector system of series of 120 and available in lengths from 2 to 22 poles. The solder retention devices (SMT anchors) on either side of the terminal housing provide an exceptionally high retention force for the terminal block to the PCB. The most significant benefit of this design is the protection it provides to the solder joints against stresses encountered in field-installations. The product eliminates completely CTE mismatch (Coefficient of thermal expansion) and provide total coplanarity by the position adapting pins. For the automatic assembling process, all pin strip versions are packed Tape on Reel and are equipped with high temperature resistant pick caps, which can comfortably be removed after the soldering process. Plug-In direction vertical to PCB and wire entrance parallel to PCB when plugged with 120-D-111, 120-D-121 Plug-In direction and wire entrance vertical to PCB when plugged with 120-A-111.

GENERAL INFORMATION

Pitch: 5.00 mm

No. of poles: 2 - 22

Usable with: plug with 120-A-111, 120-D-111, 121 series

TECHNICAL DATA

Over Voltage Category

IIII

III

II

Pollution Severity Level

3

2

2

Rated Voltage

160 V

160 V

250 V

Rated Impulse Voltage

2.5 kV

2.5 kV

2.5 kV

Rated current: 12 A

Soldering Process: Reflow solder

Rated insulation voltage: 130 V acc. to EN 60998-1

RATINGS

Current
[A]
Voltage
[V]
Group
 
AWG
 
Torque
[Nm]
15 300 B
10 300 D
15 300 B
10 300 D, E
Download PDF

TECHNICAL DRAWINGS

120-M-227-SMD.JPG - technical drawing 1
https://wecoconnectors.com/wp-content/uploads/Images/120-M-227-SMD-LPL.JPG - technical drawing 1

MATERIALS

Moulding: PA HT, grey, V-0

Comparative tracking index: CTI 250

Insulating group: IIIa

Temperature range: -40°C up to 105°C; reflow solder temperature (Peak) max. 250°C (15-30 s)

Solder pin: ø 1,1 mm (plug-in area); tin plated brass

OPTIONS / ACCESSORIES

  • CN: Consecutive Numbering
  • SM: Special Marking (please provide sketch) 
  • G05: Gold Plating (5 micro inches) 
  • G30: Gold Plating (30 micro inches) 
  • S30: Silver Plating (30 micro inches) 
  • Self-Adhesive marking strip BST-5.00[1]

Notes

STANDARD CONFIGURATIONS

Poles Items Part # Length L [mm] Step 3D PDF
02 120-M-227-SMD/02 27.498.104 10.00
05 120-M-227-SMD/05 50.494.001 25.00

Did you find the information you were looking for ?

Click on a star to rate your experience.

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.