951-LH (-DS)
PCB Connector
Screw connection, vertical wire entry, pottable
DESCRIPTION
The 951-LH series PCB screw connector with a pitch of 5 mm is particularly suited for potting printed circuits. For such potting applications, the solder pin is sealed at the housing opening against seeping casting resin. This PCB screw connector with a pitch of 5 mm is available in 2- to 12-pole design and can be mounted side-by-side without pole loss. Wire protection in DS-design reliably prevents damage to stranded wires by the screw. The wire entrance is vertical to the PCB - the casting resin surface is also vertical to the wire entrance. Version 950-LH alternatively provides wire entrance parallel to the PCB.
GENERAL INFORMATION
Pitch: 5.00 mm
No. of poles: 2 - 12
TECHNICAL DATA
Clamping Range:
without wire protector
with wire protector:
Rated cross section: 1.5 mm²
Wire stripping length: 6 mm ± 0.5 mm
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
160 V
160 V
320 V
Rated Impulse Voltage
2.5 kV
2.5 kV
2.5 kV
Rated current: 17.5 A
Rated insulation voltage: 130 V acc. to EN 60998-1
Hole in PCB: ø 1.3 mm
Torque: 0.4 Nm
RATINGS
Current [A] |
Voltage [V] |
Group |
AWG |
Torque [Nm] |
|
---|---|---|---|---|---|
![]() |
15 | 300 | B | 26 - 14 | 0.4 |
![]() |
15 | 300 | B | 26 - 14 | 0.4 |
Current [A] |
Voltage [V] |
Cross Section [mm2] |
AWG |
TORQUE |
|
---|---|---|---|---|---|
![]() |
17.5 | 250 | 1.5 |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, grey, V-0
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 100°C
Terminal body: Tin plated brass
Screw: M2.6; zinc plated steel, blue passivated
Solder pin: ø 1 mm; tin plated copper
Wire protector: Tin plated tin bronze
OPTIONS / ACCESSORIES
- CN: Consecutive Numbering
- SM: Special Marking (please provide sketch)
- G05: Gold Plating (5 micro inches)
- G30: Gold Plating (30 micro inches)
- S30: Silver Plating (30 micro inches)
- Self-Adhesive marking strip BST-5.00
- Different pin lengths
- Version with 10 mm spacing
- 970-J1, Jumper