951-LH (-DS)

PCB Connector

Screw connection, vertical wire entry, pottable

https://wecoconnectors.com/wp-content/uploads/Images/951-LH-R.JPG

DESCRIPTION

The 951-LH series PCB screw connector with a pitch of 5 mm is particularly suited for potting printed circuits. For such potting applications, the solder pin is sealed at the housing opening against seeping casting resin. This PCB screw connector with a pitch of 5 mm is available in 2- to 12-pole design and can be mounted side-by-side without pole loss. Wire protection in DS-design reliably prevents damage to stranded wires by the screw. The wire entrance is vertical to the PCB - the casting resin surface is also vertical to the wire entrance. Version 950-LH alternatively provides wire entrance parallel to the PCB.

GENERAL INFORMATION

Pitch: 5.00 mm

No. of poles: 2 - 12

TECHNICAL DATA

Clamping Range:

solid / flexible / AWG

without wire protector

0.75 - 2.5 mm² / 0.75 - 2.5 mm² / 18 - 14 AWG

with wire protector:

0.34 - 2.5 mm² / 0.34 - 2.5 mm² / 22 - 14 AWG

Rated cross section: 1.5 mm²

Wire stripping length: 6 mm ± 0.5 mm

Over Voltage Category

III

III

II

Pollution Severity Level

3

2

2

Rated Voltage

160 V

160 V

320 V

Rated Impulse Voltage

2.5 kV

2.5 kV

2.5 kV

Rated current: 17.5 A

Rated insulation voltage: 130 V acc. to EN 60998-1

Hole in PCB: ø 1.3 mm

Torque: 0.4 Nm

RATINGS

Current
[A]
Voltage
[V]
Group
 
AWG
 
Torque
[Nm]
15 300 B 26 - 14 0.4
15 300 B 26 - 14 0.4
Current
[A]
Voltage
[V]
Cross Section
[mm2]
AWG
 
TORQUE
 
17.5 250 1.5
Download PDF

TECHNICAL DRAWINGS

951-LH.JPG - technical drawing 1

MATERIALS

Moulding: PA, grey, V-0

Comparative tracking index: CTI ≥ 600

Insulating group: I

Temperature range: -40°C up to 100°C

Terminal body: Tin plated brass

Screw: M2.6; zinc plated steel, blue passivated

Solder pin: ø 1 mm; tin plated copper

Wire protector: Tin plated tin bronze

OPTIONS / ACCESSORIES

  • CN: Consecutive Numbering
  • SM: Special Marking (please provide sketch) 
  • G05: Gold Plating (5 micro inches) 
  • G30: Gold Plating (30 micro inches) 
  • S30: Silver Plating (30 micro inches) 
  • Self-Adhesive marking strip BST-5.00
  • Different pin lengths
  • Version with 10 mm spacing
  • 970-J1, Jumper

STANDARD CONFIGURATIONS

Poles Items Part # Items Part # Length L [mm] Step 3D PDF
02 951-LH/02 15.871.452 951-LH-DS/02 25.871.452 10.00
03 951-LH/03 15.871.453 951-LH-DS/03 25.871.453 15.00
04 951-LH/04 15.871.454 951-LH-DS/04 25.871.454 20.00
05 951-LH/05 15.871.455 951-LH-DS/05 25.871.455 25.00
06 951-LH/06 15.871.456 951-LH-DS/06 25.871.456 30.00
07 951-LH/07 15.871.457 951-LH-DS/07 25.871.457 35.00
08 951-LH/08 15.871.458 951-LH-DS/08 25.871.458 40.00
09 951-LH/09 15.871.459 951-LH-DS/09 25.871.459 45.00
10 951-LH/10 15.871.460 951-LH-DS/10 25.871.460 50.00
11 951-LH/11 15.871.461 951-LH-DS/11 25.871.461 55.00
12 951-LH/12 15.871.462 951-LH-DS/12 25.871.462 60.00

Did you find the information you were looking for ?

Click on a star to rate your experience.

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.