941-T (-DS)
PCB Connector
Screw connection, vertical wire entry, dovetail version
DESCRIPTION
The PCB connector 941-T is the horizontal version of 940-T with a pitch of 5,08 mm and available in 2 and 3 poles. It can be mounted side-by-side without pole loss. Lateral latching elements on the housing allow to latch the PCB connector to longer terminal strips without pole loss. The wire entrance is vertical to the PCB. Wire protection in DS-design reliably prevents damage to stranded wires by the screw. The screws are secured against self-loosening.
GENERAL INFORMATION
Pitch: 5.08 mm
No. of poles: 2 + 3
TECHNICAL DATA
Clamping Range:
without wire protector
with wire protector:
Rated cross section: 1.5 mm²
Wire stripping length: 5 mm ± 0.5 mm
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
160 V
160 V
320 V
Rated Impulse Voltage
2.5 kV
2.5 kV
2.5 kV
Rated current: 17.5 A
Rated insulation voltage: 130 V acc. to EN 60998-1
Hole in PCB: ø 1.3 mm
Torque: 0.4 Nm
RATINGS
|
Current [A] |
Voltage [V] |
Group |
AWG |
Torque [Nm] |
|
|---|---|---|---|---|---|
|
15 | 300 | B | 26 - 14 | 0.4 |
|
15 | 300 | B | 26 - 14 | 0.4 |
| Current [A] |
Voltage [V] |
Cross Section [mm2] |
AWG |
TORQUE |
|
|---|---|---|---|---|---|
|
17.5 | 250 | 1.5 |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, grey, V-0
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 100°C
Terminal body: Tin plated brass
Screw: M2,6; zinc plated steel, blue passivated
Solder pin: ø 1 mm; tin plated brass
Wire protector: Tin plated tin bronze
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-5,08
- Version up to 8 poles
