971-X (-DS)

PCB Connector

Screw connection, vertical wire entry, 2 to 12 screw common connection

https://wecoconnectors.com/wp-content/uploads/Images/971-X-R.JPG

DESCRIPTION

The PCB screw connector 971-X with a “pitch” of 5 mm has 2 to 12 screw connections at only one pole and can be used e.g. as potential distributors. This allows to loop through earth conductors easily. Wire protection in DS-design reliably prevents damage to stranded wires by the screw. The wire entrance is vertical to the PCB. A latchable version with 2 to 4 screw connections at one pole is available as type 971-TX.. NOTE: The pole numbers indicated in the article number do not designate the actual number of poles but the number of screw connections instead!

GENERAL INFORMATION

Pitch: 5.00 mm

No. of poles: 1

TECHNICAL DATA

Clamping Range:

solid / flexible / AWG

without wire protector

1 - 6 mm² / 1 - 2.5 mm² / 16 - 12 AWG

with wire protector:

0.75 - 4 mm² / 0.75 - 2.5 mm² / 18 - 12 AWG

Rated cross section: 2.5 mm²

Wire stripping length: 6.5 mm ± 0.5 mm

Over Voltage Category

III

III

II

Pollution Severity Level

3

2

2

Rated Voltage

250 V

320 V

630 V

Rated Impulse Voltage

4 kV

4 kV

4 kV

Rated current: 24 A

Hole in PCB: ø 1.3 mm

Torque: 0.5 Nm

RATINGS

Current
[A]
Voltage
[V]
Group
 
AWG
 
Torque
[Nm]
20 300 B 26 - 12 0.51
10 300 D, E 26 - 12 0.51
Current
[A]
Voltage
[V]
Cross Section
[mm2]
AWG
 
TORQUE
 
24 400 2.5
Download PDF

TECHNICAL DRAWINGS

971-X.JPG - technical drawing 1

MATERIALS

Moulding: PA, grey, V-0

Comparative tracking index: CTI ≥ 600

Insulating group: I

Temperature range: -40°C up to 100°C

Terminal body: Tin plated brass

Screw: M3; zinc plated steel, blue passivated

Solder pin: ø 1 mm; tin plated copper

Wire protector: Tin plated tin bronze

OPTIONS / ACCESSORIES

  • Consecutive numbering
  • Special marking according to drawing
  • Self-adhesive marking strip BST-5.00
  • Other P.C. pin lengths on request
  • P.C. pins with different lengths between each other
  • Other position of P.C. pins
  • Version with extended wire entrance

STANDARD CONFIGURATIONS

Poles Items Part # Items Part # Length L [mm] Step 3D PDF
05 971-X/05 10.872.555 971-X-DS/05 20.872.555 25.00
06 971-X/06 10.872.556 971-X-DS/06 20.872.556 30.00
07 971-X/07 10.872.557 971-X-DS/07 20.872.557 35.00
08 971-X/08 10.872.558 971-X-DS/08 20.872.558 40.00
09 971-X/09 10.872.559 971-X-DS/09 20.872.559 45.00
10 971-X/10 10.872.560 971-X-DS/10 20.872.560 50.00
11 971-X/11 10.872.561 971-X-DS/11 20.872.561 55.00
12 971-X/12 10.872.562 971-X-DS/12 20.872.562 60.00

Did you find the information you were looking for ?

Click on a star to rate your experience.

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.