977-OPSG (-DS)

PCB Connector

Screw connection, vertical wire entry

https://wecoconnectors.com/wp-content/uploads/Images/977-OPSG-R.JPG

DESCRIPTION

The PCB screw connector 977-OPSG is the horizontal version of 977-OP with a pitch of 7,5 mm. It is available in 2- to 19-pole design and can be mounted side-by-side in the nominal pitch. Due to their large clearance and creepage distances, these PCB connectors are particularly suitable for higher voltages. Wire protection in DS-design reliably prevents damage to stranded wires by the screw. The wire entrance is vertical to the PCB. The screws are secured against self-loosening.

GENERAL INFORMATION

Pitch: 7.50 mm

No. of poles: 2 - 19

TECHNICAL DATA

Clamping Range:

solid / flexible / AWG

without wire protector

1 - 6 mm² / 1 - 2.5 mm² / 16 - 12 AWG

with wire protector:

0.75 - 4 mm² / 0.75 - 2.5 mm² / 18 - 12 AWG

Rated cross section: 2.5 mm²

Wire stripping length: 5.5 mm ± 0.5 mm

Over Voltage Category

III

III

II

Pollution Severity Level

3

2

2

Rated Voltage

500 V (400 V)

630 V

1000 V (630V)

Rated Impulse Voltage

6 kV

6 kV

6 kV

Rated current: 24 A

Hole in PCB: ø 1.3 mm

Torque: 0.5 Nm

Other specifications: Rated voltage in brackets applies to 9-19-pole connectors, “no-flame” according to glow wire test applies to 2-8-pole connectors.

RATINGS

Current
[A]
Voltage
[V]
Group
 
AWG
 
Torque
[Nm]
15 300 B 22-12 [1] 0.51
20 300 B 26 - 12 0.51
10 300 D, E 26 - 12 0.51
Current
[A]
Voltage
[V]
Cross Section
[mm2]
AWG
 
TORQUE
 
24 750 2.5
Download PDF

TECHNICAL DRAWINGS

977-OPSG.JPG - technical drawing 1

MATERIALS

Moulding: PA, grey, V-0

Comparative tracking index: 2-8 poles: CTI ≥ 600; 9-19 poles: CTI 250

Insulating group: 2-8 poles: I; 9-19 poles: IIIa

Temperature range: -40°C up to 100°C

Terminal body: Tin plated brass

Screw: M3; zinc plated steel, blue passivated

Solder pin: ø 1 mm; tin plated brass

Wire protector: Tin plated tin bronze

OPTIONS / ACCESSORIES

  • Consecutive numbering
  • Special marking according to drawing
  • Self-adhesive marking strip BST-7,50

Notes

STANDARD CONFIGURATIONS

Poles Items Part # Items Part # Length L [mm] Step 3D PDF
02 977-OPSG/02 10.872.352 977-OPSG-DS/02 20.872.352 13,50
03 977-OPSG/03 10.872.353 977-OPSG-DS/03 20.872.353 21,00
04 977-OPSG/04 10.872.354 977-OPSG-DS/04 20.872.354 28,50
05 977-OPSG/05 10.872.355 977-OPSG-DS/05 20.872.355 36,00
06 977-OPSG/06 10.872.356 977-OPSG-DS/06 20.872.356 43,50

Did you find the information you were looking for ?

Click on a star to rate your experience.

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.