110-AP-211
Plug Connector
Screw connection, direct contact to PCB
BESCHREIBUNG
The plug connector 110-AP-211 as direct connection to PC boards with a pitch of 3,5 mm is available in 2- to 12-pole design. Due to the small pitch, the plug connector is particularly suitable for confined spaces. The high-quality elevator system guarantees reliable connection of all conductor types. Slots corresponding with the housing side walls or the PC board width determine the correct plug connector position on the conductor paths. The board design determines whether the contacting is single- or double-sided. Slots between the plug connections not only to increase the creepage distances in the housing but also serve as receptacle for coding keys.
ALLGEMEINE DATEN
Raster: 3.50 mm
Polzahlen: 2 - 12
Anwendung: Telecommunication technology, house telephones, intercoms
TECHNISCHE DATEN
Klemmbereich:
0.14 - 1.5 mm² / 0.14 - 1.5 mm² / 30 - 16 AWG
Nennquerschnitt: 1 mm²
Abisolierlänge: 6.5 mm ± 0.5 mm
Überspannungskategorie
III
III
II
Verschmutzungsgrad
3
2
2
Bemessungsspannung
160 V
160 V
320 V
Bemessungsstoßspannung
2.5 kV
2.5 kV
2.5 kV
Bemessungsstrom: 3 A for one side PCB contact6 A for two side PCB contact
Bemessungsisolationsspannung: 130 V acc. to EN 60998-1
PCB-Dicke: 1.4 - 1.8 mm
Drehmoment: 0.2 Nm
ZULASSUNGEN
|
Strom [A] |
Spannung [V] |
Gruppe |
AWG |
Drehmoment [Nm] |
|
|---|---|---|---|---|---|
|
7 | 150 | B | 30 - 16 | 0.23 |
TECHNISCHE ZEICHNUNGEN
MATERIALDATEN
Gehäusematerial: PA, grey, V-0
Kriechstromfestigkeit: CTI ≥ 600
Isolierstoffgruppe: I
Temperaturgrenzen: -40°C up to 100°C
Schraube: M2; copper alloy, tin plated
Contact Element: Copper alloy, tin plated
SONDERAUSFÜHRUNG / ZUBEHÖR
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-3,50
- Coding keys 110-AP, Part-No.: 10.496.028
- Factory-assembled coding keys on request
