140-A-126-SMD

PCB Connector for SMD

Screw connection, with anchors

https://wecoconnectors.com/wp-content/uploads/Images/140-A-126-SMD-R.JPG

BESCHREIBUNG

The 2 to 8 pole terminal 140-A-126-SMD with a pitch of 5 mm has a screw connection with elevator clamping system and is equipped with M3 captive screws. The wire clamp and soldering tag are manufactured as a single unit and permanently engaged in the casing. Soldering cylinders on either side of the housingare movable in vertical direction (floating anchors), and thereby they obtain 100% coplanarity between solder pins and soldering cylinders. They are transferred more to the front in comparison to the connector centre in order to keep the retaining strength, where the wires are connected. Thus, the force, acting on the solder pins, is reduced in a very important way. This article is only available in bar magazines or in Tape-on-Reel. When delivered in Tape-on-Reel, this product is equipped with a Pick Discs that can be easily removed after the soldering process.

ALLGEMEINE DATEN

Raster: 5.00 mm

Polzahlen: 2 - 8

Anwendung: Systems for measurement and control

TECHNISCHE DATEN

Klemmbereich:

starr / flexibel / AWG
0.14 - 2.5 mm² / 0.14 - 1.5 mm² / 26 - 16 AWG

Nennquerschnitt: 1.5 mm²

Abisolierlänge: 6 mm ± 0.5 mm

Überspannungskategorie

III

III

II

Verschmutzungsgrad

3

2

2

Bemessungsspannung

200 V

320 V

500 V

Bemessungsstoßspannung

4 kV

4 kV

4 kV

Bemessungsstrom: 16 A

Lötverfahren: Reflow solder

Bemessungsisolationsspannung: 250 V acc. to EN 60998-1

Drehmoment: 0.5 Nm

ZULASSUNGEN

Strom
[A]
Spannung
[V]
Gruppe
 
AWG
 
Drehmoment
[Nm]
10 [1] 300 B, D 30 - 14 0.51
15 300 B 30 - 14 0.51
PDF herunterladen Wie man bestellt

TECHNISCHE ZEICHNUNGEN

140-A-126-SMD.JPG - technical drawing 1
https://wecoconnectors.com/wp-content/uploads/Images/140-A-126-SMD-LPL.JPG - technical drawing 1

MATERIALDATEN

Gehäusematerial: PA HT, black, V-0

Kriechstromfestigkeit: CTI ≥ 600

Isolierstoffgruppe: I

Temperaturgrenzen: -40°C up to 120°C; reflow solder temperature peak max. 255°C acc. to DIN EN 61760-1

Klemmkörper: Nickel plated brass

Anschlussbügel: Tin plated tin bronze

Schraube: M3; zinc plated steel, blue passivated

Lötstift: 0,9 x 0,5 mm; tin plated tin bronze

SONDERAUSFÜHRUNG / ZUBEHÖR

  • Consecutive numbering
  • Special marking according to drawing
  • Self-adhesive marking strip BST-5,00 [2]

Anmerkungen

AUSFÜHRUNGEN

Pole Artikel Artikelnummer # Länge L [mm] Step 3D PDF
02 140-A-126-SMD/02 20.801.632 10.00
03 140-A-126-SMD/03 20.801.633 15.00
04 140-A-126-SMD/04 20.801.634 20.00
05 140-A-126-SMD/05 20.801.635 25.00
06 140-A-126-SMD/06 20.801.636 30.00
07 140-A-126-SMD/07 20.801.637 35.00
08 140-A-126-SMD/08 20.801.638 40.00

Did you find the information you were looking for ?

Click on a star to rate your experience.

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.