975 (-DS)
PCB Connector
Screw connection, 45° wire entry
BESCHREIBUNG
The PCB connector 975, inclined version with a pitch of 10 mm is available in 2- to 13-pole design. The wire entrance is in a 45° angle diagonal to the PC board. Therefore, this PCB connector is ideal for the assembly in the center of PCBs. The design of this PCB connector allows space-saving arrangement of consecutive rows of terminals. Wire protection in DS-design reliably prevents damage to stranded wires by the screw. The screws are secured against self-loosening.
ALLGEMEINE DATEN
Raster: 10.00 mm
Polzahlen: 2 - 13
TECHNISCHE DATEN
Spannbereich:
ohne Drahtschutz
mit Drahtschutz:
Nennquerschnitt: 2.5 mm²
Abisolierlänge: 6.5 mm ± 0.5 mm
Überspannungskategorie
III
III
II
Verschmutzungsgrad
3
2
2
Bemessungsspannung
630 V
630 V
1000 V
Bemessungsstoßspannung
6 kV
6 kV
6 kV
Bemessungsstrom: 24 A
Bemessungsisolationsspannung: 750 V acc. to EN 60998-1
Bohrung in der Leiterplatte: ø 1.3 mm
Drehmoment: 0.5 Nm
ZULASSUNGEN
| Strom [A] | Spannung [V] | Gruppe | AWG | Drehmoment [Nm] | |
|---|---|---|---|---|---|
 | 20 | 300 | B | 22-12 [1] | 0.51 |
| 10 | 300 | D | 22-12 [1] | 0.51 | |
 | 20 | 300 | B | 26 - 12 | 0.51 |
| 10 | 300 | D, E | 26 - 12 | 0.51 |
| Aktuell [A] | Spannung [V] | Querschnitt [mm2] | AWG | DREHMOMENT | |
|---|---|---|---|---|---|
 | 24 | 750 | 2.5 |
TECHNISCHE ZEICHNUNGEN
MATERIALDATEN
Gehäusematerial: PA, grey, V-0
Kriechstromfestigkeit: CTI ≥ 600
Isolierstoffgruppe: I
Temperaturgrenzen: -40°C up to 100°C
Klemmkörper: Tin plated brass
Schraube: M3; zinc plated steel, clear passivated
Lötstift: ø 1 mm; tin plated copper
Drahtschutz: Tin plated tin bronze
SONDERAUSFÜHRUNG / ZUBEHÖR
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-10,00
- Longer solder pins up to 95 mm
- Special wire protector for very thin conductors
- Version with additional raised base of 1,6 mm
