975 (-DS)

PCB Connector

Screw connection, 45° wire entry

https://wecoconnectors.com/wp-content/uploads/Images/975-R.JPG

DESCRIPTION

The PCB connector 975, inclined version with a pitch of 10 mm is available in 2- to 13-pole design. The wire entrance is in a 45° angle diagonal to the PC board. Therefore, this PCB connector is ideal for the assembly in the center of PCBs. The design of this PCB connector allows space-saving arrangement of consecutive rows of terminals. Wire protection in DS-design reliably prevents damage to stranded wires by the screw. The screws are secured against self-loosening.

GENERAL INFORMATION

Pitch: 10.00 mm

No. of poles: 2 - 13

TECHNICAL DATA

Clamping Range:

solid / flexible / AWG

without wire protector

1 - 6 mm² / 1 - 2.5 mm² / 16 - 12 AWG

with wire protector:

0.75 - 4 mm² / 0.75 - 2.5 mm² / 18 - 12 AWG

Rated cross section: 2.5 mm²

Wire stripping length: 6.5 mm ± 0.5 mm

Over Voltage Category

III

III

II

Pollution Severity Level

3

2

2

Rated Voltage

630 V

630 V

1000 V

Rated Impulse Voltage

6 kV

6 kV

6 kV

Rated current: 24 A

Rated insulation voltage: 750 V acc. to EN 60998-1

Hole in PCB: ø 1.3 mm

Torque: 0.5 Nm

RATINGS

Current
[A]
Voltage
[V]
Group
 
AWG
 
Torque
[Nm]
20 300 B 22-12 [1] 0.51
10 300 D 22-12 [1] 0.51
20 300 B 26 - 12 0.51
10 300 D, E 26 - 12 0.51
Current
[A]
Voltage
[V]
Cross Section
[mm2]
AWG
 
TORQUE
 
24 750 2.5
Download PDF

TECHNICAL DRAWINGS

975.JPG - technical drawing 1

MATERIALS

Moulding: PA, grey, V-0

Comparative tracking index: CTI ≥ 600

Insulating group: I

Temperature range: -40°C up to 100°C

Terminal body: Tin plated brass

Screw: M3; zinc plated steel, clear passivated

Solder pin: ø 1 mm; tin plated copper

Wire protector: Tin plated tin bronze

OPTIONS / ACCESSORIES

  • Consecutive numbering
  • Special marking according to drawing
  • Self-adhesive marking strip BST-10,00
  • Longer solder pins up to 95 mm
  • Special wire protector for very thin conductors
  • Version with additional raised base of 1,6 mm

Notes

STANDARD CONFIGURATIONS

Poles Items Part # Items Part # Length L [mm] Step 3D PDF
02 975/02 12.874.003 975-DS/02 22.874.003 15.00
03 975/03 12.874.005 975-DS/03 22.874.005 25.00
04 975/04 12.874.007 975-DS/04 22.874.007 35.00
05 975/05 12.874.009 975-DS/05 22.874.009 45.00
06 975/06 12.874.011 975-DS/06 22.874.011 55.00

Did you find the information you were looking for ?

Click on a star to rate your experience.

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.