970-MP (-DS)

PCB Connector

Screw connection, with test holes

https://wecoconnectors.com/wp-content/uploads/Images/970-MP-R.JPG

DESCRIPTION

The PCB connector 970-MP with a pitch of 5 mm is available in 2- to 24-pole design. Wire protection in DS-design reliably prevents damage to stranded wires by the screw. The wire entrance is parallel to the PCB. The screws are secured against self-loosening. For the grid connection, these PCB connectors are equipped with a M3 thread.

GENERAL INFORMATION

Pitch: 5.00 mm

No. of poles: 2 - 24

TECHNICAL DATA

Clamping Range:

solid / flexible / AWG

without wire protector

1 - 6 mm² / 1 - 2.5 mm² / 16 - 12 AWG

with wire protector:

0.75 - 4 mm² / 0.75 - 2.5 mm² / 18 - 12 AWG

Rated cross section: 2.5 mm²

Wire stripping length: 6.5 mm ± 0.5 mm

Over Voltage Category

III

III

II

Pollution Severity Level

3

3

2

Rated Voltage

250 V (200 V)

320 V

630 V (320 V)

Rated Impulse Voltage

4 kV

4 kV

4 kV

Rated current: 24 A

Rated insulation voltage: 250 V acc. to EN 60998-1

Hole in PCB: ø 1.3 mm

Torque: 0.5 Nm

Other specifications: Voltage data in brackets are valid for 9-24 poles types

RATINGS

Current
[A]
Voltage
[V]
Group
 
AWG
 
Torque
[Nm]
20 300 B 22-12 [1] 0.51
10 300 D 22-12 [1] 0.51
20 300 B 26 - 12 0.51
10 300 D, E 26 - 12 0.51
Current
[A]
Voltage
[V]
Cross Section
[mm2]
AWG
 
TORQUE
 
24 250 2.5
Download PDF

TECHNICAL DRAWINGS

970-MP.JPG - technical drawing 1

MATERIALS

Moulding: PA, grey, V-0

Comparative tracking index: 2-8 poles: CTI ≥ 600; 9-24 poles: CTI 250

Insulating group: 2-8 poles: I; 9-24 poles: IIIa

Temperature range: -40°C up to 100°C

Terminal body: Tin plated brass

Screw: M3; zinc plated steel, blue passivated

Solder pin: ø 1 mm; tin plated copper alloy

Wire protector: Tin plated tin bronze

OPTIONS / ACCESSORIES

  • CN: Consecutive Numbering
  • SM: Special Marking (please provide sketch) 
  • G05: Gold Plating (5 micro inches) 
  • G30: Gold Plating (30 micro inches) 
  • S30: Silver Plating (30 micro inches) 
  • WG: Wire Guide
  • Self-Adhesive marking strip BST-5.00
  • Different pin lengths
  • Version with 10 mm spacing

Notes

STANDARD CONFIGURATIONS

Poles Items Part # Items Part # Length L [mm] Step 3D PDF
02 970-MP/02 10.872.202 970-MP-DS/02 20.872.202 10.00
03 970-MP/03 10.872.203 970-MP-DS/03 20.872.203 15.00
04 970-MP/04 10.872.204 970-MP-DS/04 20.872.204 20.00
05 970-MP/05 10.872.205 970-MP-DS/05 20.872.205 25.00
06 970-MP/06 10.872.206 970-MP-DS/06 20.872.206 30.00

Did you find the information you were looking for ?

Click on a star to rate your experience.

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.