970-MP (-DS)
PCB Connector
Screw connection, with test holes
DESCRIPTION
The PCB connector 970-MP with a pitch of 5 mm is available in 2- to 24-pole design. Wire protection in DS-design reliably prevents damage to stranded wires by the screw. The wire entrance is parallel to the PCB. The screws are secured against self-loosening. For the grid connection, these PCB connectors are equipped with a M3 thread.
GENERAL INFORMATION
Pitch: 5.00 mm
No. of poles: 2 - 24
TECHNICAL DATA
Clamping Range:
without wire protector
with wire protector:
Rated cross section: 2.5 mm²
Wire stripping length: 6.5 mm ± 0.5 mm
Over Voltage Category
III
III
II
Pollution Severity Level
3
3
2
Rated Voltage
250 V (200 V)
320 V
630 V (320 V)
Rated Impulse Voltage
4 kV
4 kV
4 kV
Rated current: 24 A
Rated insulation voltage: 250 V acc. to EN 60998-1
Hole in PCB: ø 1.3 mm
Torque: 0.5 Nm
Other specifications: Voltage data in brackets are valid for 9-24 poles types
RATINGS
Current [A] |
Voltage [V] |
Group |
AWG |
Torque [Nm] |
|
---|---|---|---|---|---|
20 | 300 | B | 22-12 [1] | 0.51 | |
10 | 300 | D | 22-12 [1] | 0.51 | |
20 | 300 | B | 26 - 12 | 0.51 | |
10 | 300 | D, E | 26 - 12 | 0.51 |
Current [A] |
Voltage [V] |
Cross Section [mm2] |
AWG |
TORQUE |
|
---|---|---|---|---|---|
24 | 250 | 2.5 |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, grey, V-0
Comparative tracking index: 2-8 poles: CTI ≥ 600; 9-24 poles: CTI 250
Insulating group: 2-8 poles: I; 9-24 poles: IIIa
Temperature range: -40°C up to 100°C
Terminal body: Tin plated brass
Screw: M3; zinc plated steel, blue passivated
Solder pin: ø 1 mm; tin plated copper alloy
Wire protector: Tin plated tin bronze
OPTIONS / ACCESSORIES
- CN: Consecutive Numbering
- SM: Special Marking (please provide sketch)
- G05: Gold Plating (5 micro inches)
- G30: Gold Plating (30 micro inches)
- S30: Silver Plating (30 micro inches)
- WG: Wire Guide
- Self-Adhesive marking strip BST-5.00
- Different pin lengths
- Version with 10 mm spacing