970-FBW-FU-DS

Plug Connector

Screw connection, plugable from the bottom, with supporting ribs

https://wecoconnectors.com/wp-content/uploads/Images/970-FBW-FU-DS-R.JPG

DESCRIPTION

The plug connector 970-FBW-FU-DS with a pitch of 5 mm is available in 2- to 12-pole design and can be mounted side-by-side without pole loss. This connector can be plugged onto 971-SLR or 971-SLR-THR pin strips with pins of ø 1.3 mm. The bottom feet ensure secure footing of the component on the PCB. The screws are secured against self-loosening. Upon request, the 970-FBW-FU-DS series is also available with additional ribs on the wire entrance side, which increase clearance and creepage distances.

GENERAL INFORMATION

Pitch: 5.00 mm

No. of poles: 2 -12

Usable with: plugs with 971-SLR series

TECHNICAL DATA

Clamping Range:

solid / flexible / AWG

without wire protector

1 - 6 mm² / 1 - 4 mm² / 16 - 10 AWG

with wire protector:

0.75 - 4 mm² / 0.75 - 2.5 mm² / 18 - 12 AWG

Rated cross section: 2.5 mm²

Wire stripping length: 5.5 mm ± 0.5 mm

Over Voltage Category

III

III

II

Pollution Severity Level

3

2

2

Rated Voltage

250 V

320 V

630 V

Rated Impulse Voltage

4 kV

4 kV

4 kV

Rated current: 6 A

Rated insulation voltage: 250 V acc. to EN 60998-1

Torque: 0.5 Nm

Download PDF

TECHNICAL DRAWINGS

970-FBW-FU-DS.JPG - technical drawing 1

MATERIALS

Moulding: PA, grey, V-0

Comparative tracking index: CTI ≥ 600

Insulating group: I

Temperature range: -40°C up to 100°C

Terminal body: Tin plated brass

Spring: Stainless strip steel

Screw: M3; zinc plated steel, blue passivated

Wire protector: Tin plated tin bronze

Notes

STANDARD CONFIGURATIONS

Poles Items Part # Length L [mm] Step 3D PDF
02 970-FBW-FU-DS/02 40.873.192 10.00
03 970-FBW-FU-DS/03 40.873.193 15.00
04 970-FBW-FU-DS/04 40.873.194 20.00
06 970-FBW-FU-DS/06 40.873.196 30.00

Did you find the information you were looking for ?

Click on a star to rate your experience.

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.