970-FBW-FU-DS
Plug Connector
Screw connection, plugable from the bottom, with supporting ribs
DESCRIPTION
The plug connector 970-FBW-FU-DS with a pitch of 5 mm is available in 2- to 12-pole design and can be mounted side-by-side without pole loss. This connector can be plugged onto 971-SLR or 971-SLR-THR pin strips with pins of ø 1.3 mm. The bottom feet ensure secure footing of the component on the PCB. The screws are secured against self-loosening. Upon request, the 970-FBW-FU-DS series is also available with additional ribs on the wire entrance side, which increase clearance and creepage distances.
GENERAL INFORMATION
TECHNICAL DATA
Clamping Range:
without wire protector
with wire protector:
Rated cross section: 2.5 mm²
Wire stripping length: 5.5 mm ± 0.5 mm
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
250 V
320 V
630 V
Rated Impulse Voltage
4 kV
4 kV
4 kV
Rated current: 6 A
Rated insulation voltage: 250 V acc. to EN 60998-1
Torque: 0.5 Nm
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, grey, V-0
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 100°C
Terminal body: Tin plated brass
Spring: Stainless strip steel
Screw: M3; zinc plated steel, blue passivated
Wire protector: Tin plated tin bronze
