130-A

Plug Connector

Screw connection

https://wecoconnectors.com/wp-content/uploads/Images/130-A-R.JPG

DESCRIPTION

The plug connector 130-A series was developed according to “White Goods Standard RAST 5 (Plug-Connection-Technology with a pitch of 5 mm). Due to its diverse coding possibilities, it offers maximum safety against incorrect plugging. For the coded version, a corresponding drawing or description of the desired positioning (P), coding (K) and interlocking (V) is to be provided by the customer. The technical drawing shows an example of a 4-pole plug connector with all data on positioning, coding and interlocking location 1/2 and 3/4 . The article numbers stated below refer to 2- to 12-pole plug connectors with exemplary coding design, which are further described on a supplementary data sheet. Other coded versions (P,K,V) are available upon request.

GENERAL INFORMATION

Pitch: 5.00 mm

No. of poles: 2 - 12

Usable with: tab connectors 130-K, 900-SUN-5

TECHNICAL DATA

Clamping Range:

solid / flexible / AWG
0.2 - 4 mm² / 0.2 - 2.5 mm² / 26 - 14 AWG

Rated cross section: 2.5 mm²

Wire stripping length: 7 mm ± 0.5 mm

Over Voltage Category

III

III

II

Pollution Severity Level

3

2

2

Rated Voltage

250 V

320 V

630 V

Rated Impulse Voltage

4 kV

4 kV

4 kV

Rated insulation voltage: 12 A

Torque: 0.5 Nm

RATINGS

Current
[A]
Voltage
[V]
Group
 
AWG
 
Torque
[Nm]
22 300 B 26 - 10 0.51
10 300 D 26 - 10 0.51
22 300 B 26 - 10 0.51
10 300 D, E 26 - 10 0.51
Download PDF

TECHNICAL DRAWINGS

130-A.JPG - technical drawing 1

MATERIALS

Moulding: PA, grey, V-0

Comparative tracking index: CTI ≥ 600

Insulating group: I

Temperature range: -40°C up to 100°C

Terminal body: Nickel plated brass

Spring: Tin plated tin bronze

Pressure clamp: Tin plated tin bronze

Screw: M3, zinc plated steel, blue passivated

OPTIONS / ACCESSORIES

  • Consecutive numbering
  • Special marking according to drawing
  • Self-adhesive marking strip BST-5,00
  • Pitch of 10 mm for larger clearance and creepage distances
  • Version with extended wire entrance

STANDARD CONFIGURATIONS

Poles Items Part # Length L [mm] Step 3D PDF
02 130-A/02 21.802.120 10.00
03 130-A/03 21.802.130 15.00
04 130-A/04 21.802.140 20.00
05 130-A/05 21.802.151 25.00
06 130-A/06 21.802.161 30.00
07 130-A/07 21.802.171 35.00
08 130-A/08 23.802.181 40.00
09 130-A/09 21.802.191 45.00
10 130-A/10 21.802.100 50.00
11 130-A/11 21.802.111 55.00
12 130-A/12 21.802.122 60.00

Did you find the information you were looking for ?

Click on a star to rate your experience.

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.