130-A
Plug Connector
Screw connection
DESCRIPTION
The plug connector 130-A series was developed according to “White Goods Standard RAST 5 (Plug-Connection-Technology with a pitch of 5 mm). Due to its diverse coding possibilities, it offers maximum safety against incorrect plugging. For the coded version, a corresponding drawing or description of the desired positioning (P), coding (K) and interlocking (V) is to be provided by the customer. The technical drawing shows an example of a 4-pole plug connector with all data on positioning, coding and interlocking location 1/2 and 3/4 . The article numbers stated below refer to 2- to 12-pole plug connectors with exemplary coding design, which are further described on a supplementary data sheet. Other coded versions (P,K,V) are available upon request.
GENERAL INFORMATION
TECHNICAL DATA
Clamping Range:
0.2 - 4 mm² / 0.2 - 2.5 mm² / 26 - 14 AWG
Rated cross section: 2.5 mm²
Wire stripping length: 7 mm ± 0.5 mm
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
250 V
320 V
630 V
Rated Impulse Voltage
4 kV
4 kV
4 kV
Rated insulation voltage: 12 A
Torque: 0.5 Nm
RATINGS
Current [A] | Voltage [V] | Group | AWG | Torque [Nm] | |
---|---|---|---|---|---|
| 22 | 300 | B | 26 - 10 | 0.51 |
10 | 300 | D | 26 - 10 | 0.51 | |
| 22 | 300 | B | 26 - 10 | 0.51 |
10 | 300 | D, E | 26 - 10 | 0.51 |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, grey, V-0
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 100°C
Terminal body: Nickel plated brass
Spring: Tin plated tin bronze
Pressure clamp: Tin plated tin bronze
Screw: M3, zinc plated steel, blue passivated
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-5,00
- Pitch of 10 mm for larger clearance and creepage distances
- Version with extended wire entrance