302-NSLW (-HDS)

Plug-In Terminal Strip

Screw connection & short pin, wire entrance vertical to pin, low profile version

https://wecoconnectors.com/wp-content/uploads/Images/302-NSLW-R.JPG

DESCRIPTION

The plug-in terminal strip 302-NSLW, low version, is available in 8 mm pitch with 2 to 12 poles. It has one screw connection per pole and one vertical pin for the connection to the female clamping unit. Plug-in terminal strip 302-NFLW creates a plug-in connection with wire entrances from opposite directions. This plug-in terminal strip combination requires relatively little mounting space. Since the plug-in direction is designed parallel to the screw axes, the tensile forces on the leads have no direct effect on the contact performance. This arrangement does not allow for the connection of an earth lead. The wire protector of the “HDS”-version reliably prevents damage to multi-wire flexible conductors by the turning screw. These terminals strips can be screw-mounted on a substrate.

GENERAL INFORMATION

Pitch: 8.00 mm

No. of poles: 2 - 12

Usable with: 302-NFLW-DS

Application: This plug connector is well suited for applications that require to easily open and close not energised circuits.

TECHNICAL DATA

Clamping Range:

solid / flexible / AWG

without wire protector

0.5 - 4 mm² / 0.5 - 2.5 mm² / 20 - 12 AWG

with wire protector:

0.34 - 2.5 mm² / 0.34 - 2.5 mm² / 22 - 14 AWG

Rated cross section: 1.5 mm²

Wire stripping length: 7 mm ± 0.5 mm

Over Voltage Category

III

III

II

Pollution Severity Level

3

2

2

Rated Voltage

250 V

320 V

630 V

Rated Impulse Voltage

4 kV

4 kV

4 kV

Rated current: 6 A

Rated insulation voltage: 250 V acc. to EN 60998-1

Torque: 0.4 Nm

Other specifications: Rated values apply to use in combination with 302-NFLW-DS.

RATINGS

Current
[A]
Voltage
[V]
Group
 
AWG
 
Torque
[Nm]
10 300 B,D 22 - 14 0.4
10 300 B,D,E 26 - 12 0.4 [1]
Download PDF

TECHNICAL DRAWINGS

302-NSLW.JPG - technical drawing 1

MATERIALS

Moulding: PA, natural, V-2

Comparative tracking index: CTI ≥ 600

Insulating group: I

Temperature range: -40°C up to 100°C

Terminal body: Nickel plated brass

Screw: M2,6; zinc plated steel, blue passivated

Wire protector: Stainless steel strip

OPTIONS / ACCESSORIES

  • Marking options on the screw guides
  • Jumper 302-J

Notes

STANDARD CONFIGURATIONS

Poles Items Part # Items Part # Length L [mm] Step 3D PDF
02 302-NSLW/02 12.820.039 302-NSLW-HDS/02 32.820.039 15.00
03 302-NSLW/03 13.820.039 302-NSLW-HDS/03 33.820.039 23.00
04 302-NSLW/04 14.820.039 302-NSLW-HDS/04 34.820.039 31.00
05 302-NSLW/05 15.820.039 302-NSLW-HDS/05 35.820.039 39.00
06 302-NSLW/06 16.820.039 302-NSLW-HDS/06 36.820.039 47.00
07 302-NSLW/07 17.820.039 302-NSLW-HDS/07 37.820.039 55.00
08 302-NSLW/08 18.820.039 302-NSLW-HDS/08 38.820.039 63.00
09 302-NSLW/09 19.820.039 302-NSLW-HDS/09 39.820.039 71.00
10 302-NSLW/10 20.820.039 302-NSLW-HDS/10 40.820.039 79.00
11 302-NSLW/11 21.820.039 302-NSLW-HDS/11 41.820.039 87.00
12 302-NSLW/12 22.820.039 302-NSLW-HDS/12 42.820.039 94.00

Did you find the information you were looking for ?

Click on a star to rate your experience.

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.