302-NSLW (-HDS)
Plug-In Terminal Strip
Screw connection & short pin, wire entrance vertical to pin, low profile version
DESCRIPTION
The plug-in terminal strip 302-NSLW, low version, is available in 8 mm pitch with 2 to 12 poles. It has one screw connection per pole and one vertical pin for the connection to the female clamping unit. Plug-in terminal strip 302-NFLW creates a plug-in connection with wire entrances from opposite directions. This plug-in terminal strip combination requires relatively little mounting space. Since the plug-in direction is designed parallel to the screw axes, the tensile forces on the leads have no direct effect on the contact performance. This arrangement does not allow for the connection of an earth lead. The wire protector of the “HDS”-version reliably prevents damage to multi-wire flexible conductors by the turning screw. These terminals strips can be screw-mounted on a substrate.
GENERAL INFORMATION
Pitch: 8.00 mm
No. of poles: 2 - 12
Usable with: 302-NFLW-DS
Application: This plug connector is well suited for applications that require to easily open and close not energised circuits.
TECHNICAL DATA
Clamping Range:
without wire protector
with wire protector:
Rated cross section: 1.5 mm²
Wire stripping length: 7 mm ± 0.5 mm
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
250 V
320 V
630 V
Rated Impulse Voltage
4 kV
4 kV
4 kV
Rated current: 6 A
Rated insulation voltage: 250 V acc. to EN 60998-1
Torque: 0.4 Nm
Other specifications: Rated values apply to use in combination with 302-NFLW-DS.
RATINGS
| Current [A] | Voltage [V] | Group | AWG | Torque [Nm] | |
|---|---|---|---|---|---|
 | 10 | 300 | B,D | 22 - 14 | 0.4 |
 | 10 | 300 | B,D,E | 26 - 12 | 0.4 [1] |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, natural, V-2
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 100°C
Terminal body: Nickel plated brass
Screw: M2,6; zinc plated steel, blue passivated
Wire protector: Stainless steel strip
OPTIONS / ACCESSORIES
- Marking options on the screw guides
- Jumper 302-J
