970-X (-DS)

PCB Connector

Screw connection, 2 to 12 screw common connection

https://wecoconnectors.com/wp-content/uploads/Images/970-X-R.JPG

DESCRIPTION

The PCB screw connector 970-X.. with a “pitch" of 5 mm has 2 to 12 screw connections at only one pole and can be used e.g. as potential distributors. This allows to loop through earth conductors easily. Wire protection in DS-design reliably prevents damage to stranded wires by the screw. A latchable version with 2 to 4 screw connections at one pole is available as type 970-TX.. NOTE: The pole numbers indicated in the article number do not designate the actual number of poles but the number of screw connections instead!

GENERAL INFORMATION

Pitch: 5.00 mm

No. of poles: 1

TECHNICAL DATA

Clamping Range:

solid / flexible / AWG

without wire protector

1 - 6 mm² / 1 - 2.5 mm² / 16 - 12 AWG

with wire protector:

0.75 - 4 mm² / 0.75- 2.5 mm² / 18 - 12 AWG

Rated cross section: 2.5 mm²

Wire stripping length: 6.5 mm ± 0.5 mm

Over Voltage Category

III

III

II

Pollution Severity Level

3

2

2

Rated Voltage

250 V

320 V

630 V

Rated Impulse Voltage

4 kV

4 kV

4 kV

Rated current: 24 A

Rated insulation voltage: 250 V acc. to EN 60998-1

Hole in PCB: ø 1.3 mm

Torque: 0.5 Nm

RATINGS

Current
[A]
Voltage
[V]
Group
 
AWG
 
Torque
[Nm]
20 300 B 22-12 [1] 0.51
10 300 D 22-12 [1] 0.51
20 300 B 26 - 12 0.51
10 300 D, E 26 - 12 0.51
Current
[A]
Voltage
[V]
Cross Section
[mm2]
AWG
 
TORQUE
 
24 400 2.5
Download PDF

TECHNICAL DRAWINGS

970-X.JPG - technical drawing 1

MATERIALS

Moulding: PA, grey, V-0

Comparative tracking index: CTI ≥ 600

Insulating group: I

Temperature range: -40°C up to 100°C

Terminal body: Tin plated brass

Screw: M3; zinc plated steel, blue passivated

Solder pin: ø 1 mm; tin plated copper

Wire protector: Tin plated tin bronze

OPTIONS / ACCESSORIES

  • CN: Consecutive Numbering
  • SM: Special Marking (please provide sketch)
  • G05: Gold Plating (5 micro inches)
  • G30: Gold Plating (30 micro inches)
  • S30: Silver Plating (30 micro inches)
  • Self-Adhesive marking strip BST-5.00
  • Different pin lengths

Notes

STANDARD CONFIGURATIONS

Poles Items Part # Items Part # Length L [mm] Step 3D PDF
02 970-X/02 10.872.582 970-X-DS/02 20.872.582 10.00
03 970-X/03 10.872.583 970-X-DS/03 20.872.583 15.00
04 970-X/04 10.872.584 970-X-DS/04 20.872.584 20.00
05 970-X/05 10.872.585 970-X-DS/05 20.872.585 25.00
06 970-X/06 10.872.586 970-X-DS/06 20.872.586 30.00
07 970-X/07 10.872.587 970-X-DS/07 20.872.587 35.00
08 970-X/08 10.872.588 970-X-DS/08 20.872.588 40.00
09 970-X/09 10.872.589 970-X-DS/09 20.872.589 45.00
10 970-X/10 10.872.590 970-X-DS/10 20.872.590 50.00
11 970-X/11 10.872.591 970-X-DS/11 20.872.591 55.00
12 970-X/12 10.872.592 970-X-DS/12 20.872.592 60.00

Did you find the information you were looking for ?

Click on a star to rate your experience.

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.