970

PCB Connector

Screw connection

https://wecoconnectors.com/wp-content/uploads/Images/970-R.JPG

DESCRIPTION

The PCB connector 970 with a pitch of 5 mm is available in 2- to 32-pole design._x000D_ Compared to the smaller PCB connector 950, it has a larger clamping range and larger clearance and creepage distances._x000D_ Wire protection in DS-design reliably prevents damage to stranded wires by the screw._x000D_ The wire entrance is parallel to the PCB._x000D_ The screws are secured against self-loosening. For the grid connection, these PCB connectors are equipped with a M3 thread.

GENERAL INFORMATION

TECHNICAL DATA

Clamping Range:

solid / flexible / AWG

without wire protector

1 - 6 mm² / 1 - 2.5 mm² / 16 - 12 AWG

with wire protector:

0.75 - 4 mm² / 0.75 - 2.5 mm² / 18 - 12 AWG

Rated cross section: 2.5 mm²

Wire stripping length: 6.5 mm ± 0.5 mm

Over Voltage Category

III

III

II

Pollution Severity Level

3

2

2

Rated Voltage

250 V (200 V)

320 V

630 V (400 V)

Rated Impulse Voltage

4 kV

4 kV

4 kV

Rated current: 24 A

Soldering Process: Wave solder

Rated insulation voltage: 250 V acc. to EN 60998-1

Hole in PCB: ø 1.3 mm

Torque: 0.5 Nm

Other specifications: Voltage data in brackets are valid for 9-32 poles types. 2-8 poles types: "no-flame" acc. to glow-wire test.

RATINGS

Current
[A]
Voltage
[V]
Group
 
AWG
 
Torque
[Nm]
20 300 22-12 [1] 0.51
10 300 D 22-12 [1] 0.51
20 300 26 - 12 0.51
10 300 D, E 26 - 12 0.51
Current
[A]
Voltage
[V]
Cross Section
[mm2]
AWG
 
TORQUE
 
24 400 2.5
Download PDF

TECHNICAL DRAWINGS

970.JPG - technical drawing 1

MATERIALS

Terminal body: Tin plated brass

Screw: M3; zinc plated steel, blue passivated

Solder pin: ø 1 mm; tin plated copper alloy

Wire protector: Tin plated tin bronze

OPTIONS / ACCESSORIES

  • CN: Consecutive Numbering
  • SM: Special Marking (please provide sketch) 
  • G05: Gold Plating (5 micro inches) 
  • G30: Gold Plating (30 micro inches) 
  • S30: Silver Plating (30 micro inches) 
  • BS: Copper alloy (brass) screw
  • WG: Wire Guide
  • Self-Adhesive marking strip BST-5.00
  • Different pin lengths

Notes

STANDARD CONFIGURATIONS

Poles Items Part # Length L [mm] Step 3D PDF
02 970/02 10.872.002 11.00
03 970/03 10.872.003 16.00
04 970/04 10.872.004 21.00
05 970/05 10.872.005 26.00
06 970/06 10.872.006 31.00
07 970/07 10.872.007 36.00
08 970/08 10.872.008 41.00
09 970/09 10.872.009 46.00
10 970/10 10.872.010 51.00
11 970/11 10.872.011 56.00
12 970/12 10.872.012 61.00
13 970/13 10.872.013 66.00
14 970/14 10.872.014 71.00
15 970/15 10.872.015 76.00
16 970/16 10.872.016 81.00
17 970/17 10.872.017 86.00
18 970/18 10.872.018 91.00
19 970/19 10.872.019 96.00
20 970/20 10.872.020 101.00
22 970/22 10.872.022 111.00
24 970/24 10.872.024 121.00
26 970/26 10.872.026 131.00
28 970/28 10.872.028 141.00
30 970/30 10.872.030 151.00
32 970/32 10.872.032 161.00

Did you find the information you were looking for ?

Click on a star to rate your experience.

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.