970 (-DS)
PCB connector
Screw connection
DESCRIPTION
The PCB connector 970 with a pitch of 5 mm is available in 2- to 32-pole design._x000D_ Compared to the smaller PCB connector 950, it has a larger clamping range and larger clearance and creepage distances._x000D_ Wire protection in DS-design reliably prevents damage to stranded wires by the screw._x000D_ The wire entrance is parallel to the PCB._x000D_ The screws are secured against self-loosening. For the grid connection, these PCB connectors are equipped with a M3 thread.
GENERAL INFORMATION
Pitch: 5 mm
No. of poles: 2 - 32
TECHNICAL DATA
Clamping Range:
without wire protector
with wire protector:
Rated cross section: 2.5 mm²
Wire stripping length: 6.5 mm ± 0.5 mm
Rated current: 24 A
Hole in PCB: ø 1.3 mm
Torque: 0,5 Nm
Other specifications: Voltage data in brackets are valid for 9-32 poles types. 2-8 poles types are "no-flame" acc. to glow-wire test
RATINGS
|
Current [A] |
Voltage [V] |
Group |
AWG |
Torque [Nm] |
|
|---|---|---|---|---|---|
|
20 | 300 | 22-12 [1] | 0.51 | |
| 10 | 300 | D | 22-12 [1] | 0.51 | |
|
20 | 300 | B | 26 - 12 | 0.51 |
| 10 | 300 | D, E | 26 - 12 | 0.51 |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, grey, V-0
Comparative tracking index: 2-8 poles: CTI ≥ 600; 9-32 poles: CTI 400
Insulating group: 2-8 poles: I; 9-32 poles: II
Temperature range: -40°C up to 100°C
Terminal body: Tin plated brass
Screw: M3; zinc plated steel, blue passivated
Solder pin: ø 1 mm; tin plated copper alloy
Wire protector: Tin plated tin bronze
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-5,00
- Longer P.C. pins up to 95 mm
- With test holes, see 970-MP
- Version with extended wire entrance
- Double wire protector as bridge
