971-DOPG (-DS)

PCB Connector

Screw connection, 2 clamping units per pole

https://wecoconnectors.com/wp-content/uploads/Images/971-DOPG-R.JPG

DESCRIPTION

The PCB connector 971-DOPG with a pitch of 5 mm is based on our series 970 connectors and is available in 2- to 8-pole design. This PCB connector features two consecutive clamping units thus allowing 2, 4 or more connections per pole for potential distribution. It can either be directly mounted on the PCB or used as adapter for connectors with only one wire connection per pole. As version without the solder pin this a particularly space-saving connector. Combinations with our standard series 970 versions with only one clamping unit per pole are possible. The 2- and 3-pole versions of 971-DOPG are also available with lateral latching elements.

GENERAL INFORMATION

Pitch: 5.00 mm

No. of poles: 2 - 8

TECHNICAL DATA

Clamping Range:

solid / flexible / AWG

without wire protector

1 - 1.5 mm² / 1 - 1.5 mm² / 16 AWG

with wire protector:

0.75 - 1.5 mm² / 0.75 - 1.5 mm² / 18 - 16 AWG

Rated cross section: 1.5 mm²

Wire stripping length: 6.5 mm ± 0.5 mm

Over Voltage Category

III

III

II

Pollution Severity Level

3

2

2

Rated Voltage

250 V

320 V

630 V

Rated Impulse Voltage

4 kV

4 kV

4 kV

Rated current: 17.5 A

Rated insulation voltage: 250 V acc. to EN 60998-1

Hole in PCB: ø 1.3 mm

Torque: 0.5 Nm

RATINGS

Current
[A]
Voltage
[V]
Group
 
AWG
 
Torque
[Nm]
20 300 B 22-12 [1] 0.51
10 300 D 22-12 [1] 0.51
20 300 B 26 - 12 0.51
10 300 D, E 26 - 12 0.51
Current
[A]
Voltage
[V]
Cross Section
[mm2]
AWG
 
TORQUE
 
17.5 250
Download PDF

TECHNICAL DRAWINGS

971-DOPG.JPG - technical drawing 1

MATERIALS

Moulding: PA, grey, V-0

Comparative tracking index: CTI ≥ 600

Insulating group: I

Temperature range: -40°C up to 100°C

Terminal body: Tin plated brass

Screw: M3; zinc plated steel, blue passivated

Solder pin: ø 1 mm; tin plated copper

Wire protector: Tin plated tin bronze

OPTIONS / ACCESSORIES

  • Consecutive numbering
  • Special marking according to drawing
  • Self-adhesive marking strip BST-5,00
  • Pitch of 5,08 mm or 7,5 mm for larger clearance and creepage distances
  • Other solder pin lengths on request
  • Available without or with two solder pins
  • Double clamping units to be combined with single clamping units
  • 1 pole version with 4 clamping units (971-DOPG-TX2) on request

Notes

STANDARD CONFIGURATIONS

Poles Items Part # Items Part # Length L [mm] Step 3D PDF
02 971-DOPG/02 84.872.102 971-DOPG-DS/02 94.872.102 11.00
03 971-DOPG/03 84.872.103 971-DOPG-DS/03 94.872.103 16.00
04 971-DOPG/04 84.872.104 971-DOPG-DS/04 94.872.104 21.00
05 971-DOPG/05 84.872.105 971-DOPG-DS/05 94.872.105 26.00
06 971-DOPG/06 84.872.106 971-DOPG-DS/06 94.872.106 31.00

Did you find the information you were looking for ?

Click on a star to rate your experience.

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.