971-DOPG (-DS)
PCB Connector
Screw connection, 2 clamping units per pole
DESCRIPTION
The PCB connector 971-DOPG with a pitch of 5 mm is based on our series 970 connectors and is available in 2- to 8-pole design. This PCB connector features two consecutive clamping units thus allowing 2, 4 or more connections per pole for potential distribution. It can either be directly mounted on the PCB or used as adapter for connectors with only one wire connection per pole. As version without the solder pin this a particularly space-saving connector. Combinations with our standard series 970 versions with only one clamping unit per pole are possible. The 2- and 3-pole versions of 971-DOPG are also available with lateral latching elements.
GENERAL INFORMATION
Pitch: 5.00 mm
No. of poles: 2 - 8
TECHNICAL DATA
Clamping Range:
without wire protector
with wire protector:
Rated cross section: 1.5 mm²
Wire stripping length: 6.5 mm ± 0.5 mm
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
250 V
320 V
630 V
Rated Impulse Voltage
4 kV
4 kV
4 kV
Rated current: 17.5 A
Rated insulation voltage: 250 V acc. to EN 60998-1
Hole in PCB: ø 1.3 mm
Torque: 0.5 Nm
RATINGS
|
Current [A] |
Voltage [V] |
Group |
AWG |
Torque [Nm] |
|
|---|---|---|---|---|---|
|
20 | 300 | B | 22-12 [1] | 0.51 |
| 10 | 300 | D | 22-12 [1] | 0.51 | |
|
20 | 300 | B | 26 - 12 | 0.51 |
| 10 | 300 | D, E | 26 - 12 | 0.51 |
| Current [A] |
Voltage [V] |
Cross Section [mm2] |
AWG |
TORQUE |
|
|---|---|---|---|---|---|
|
17.5 | 250 |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, grey, V-0
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 100°C
Terminal body: Tin plated brass
Screw: M3; zinc plated steel, blue passivated
Solder pin: ø 1 mm; tin plated copper
Wire protector: Tin plated tin bronze
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-5,00
- Pitch of 5,08 mm or 7,5 mm for larger clearance and creepage distances
- Other solder pin lengths on request
- Available without or with two solder pins
- Double clamping units to be combined with single clamping units
- 1 pole version with 4 clamping units (971-DOPG-TX2) on request
