970-MP (-DS)
PCB Connector
Screw connection, with test holes
BESCHREIBUNG
The PCB connector 970-MP with a pitch of 5 mm is available in 2- to 24-pole design. Wire protection in DS-design reliably prevents damage to stranded wires by the screw. The wire entrance is parallel to the PCB. The screws are secured against self-loosening. For the grid connection, these PCB connectors are equipped with a M3 thread.
ALLGEMEINE DATEN
Raster: 5.00 mm
Polzahlen: 2 - 24
TECHNISCHE DATEN
Spannbereich:
ohne Drahtschutz
mit Drahtschutz:
Nennquerschnitt: 2.5 mm²
Abisolierlänge: 6.5 mm ± 0.5 mm
Überspannungskategorie
III
III
II
Verschmutzungsgrad
3
3
2
Bemessungsspannung
250 V (200 V)
320 V
630 V (320 V)
Bemessungsstoßspannung
4 kV
4 kV
4 kV
Bemessungsstrom: 24 A
Bemessungsisolationsspannung: 250 V acc. to EN 60998-1
Bohrung in der Leiterplatte: ø 1.3 mm
Drehmoment: 0.5 Nm
Andere Spezifikationen: Voltage data in brackets are valid for 9-24 poles types
ZULASSUNGEN
|
Strom [A] |
Spannung [V] |
Gruppe |
AWG |
Drehmoment [Nm] |
|
|---|---|---|---|---|---|
|
20 | 300 | B | 22-12 [1] | 0.51 |
| 10 | 300 | D | 22-12 [1] | 0.51 | |
|
20 | 300 | B | 26 - 12 | 0.51 |
| 10 | 300 | D, E | 26 - 12 | 0.51 |
| Aktuell [A] |
Spannung [V] |
Querschnitt [mm2] |
AWG |
DREHMOMENT |
|
|---|---|---|---|---|---|
|
24 | 250 | 2.5 |
TECHNISCHE ZEICHNUNGEN
MATERIALDATEN
Gehäusematerial: PA, grey, V-0
Kriechstromfestigkeit: 2-8 poles: CTI ≥ 600; 9-24 poles: CTI 250
Isolierstoffgruppe: 2-8 poles: I; 9-24 poles: IIIa
Temperaturgrenzen: -40°C up to 100°C
Klemmkörper: Tin plated brass
Schraube: M3; zinc plated steel, blue passivated
Lötstift: ø 1 mm; tin plated copper alloy
Drahtschutz: Tin plated tin bronze
SONDERAUSFÜHRUNG / ZUBEHÖR
- CN: Consecutive Numbering
- SM: Special Marking (please provide sketch)
- G05: Gold Plating (5 micro inches)
- G30: Gold Plating (30 micro inches)
- S30: Silver Plating (30 micro inches)
- WG: Wire Guide
- Self-Adhesive marking strip BST-5.00
- Different pin lengths
- Version with 10 mm spacing
