120-M-215
Header
Horizontal plug-in, with screw locking features
DESCRIPTION
The pin strip 120-M-215, with connecting flanges and a pitch of 5 mm is available in 2- to 12-pole design and can be mounted side-by-side. Thread insert in the connecting flanges allow to screw the pin strips together with the plug connectors 120-A-115, 120-D-115 and 120-D-125. In addition, these connecting flanges can also be used to mount the pin strip to a housing wall. The plug direction for mating pin strips is parallel to the PCB. For each pole, the pin strip has one trapezoidal coding slot in which the coding elements 120-K can be inserted.
GENERAL INFORMATION
TECHNICAL DATA
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
250 V
320 V
630 V
Rated Impulse Voltage
4 kV
4 kV
4 kV
Rated current: 12 A
Rated insulation voltage: 250 V acc. to EN 60998-1
Hole in PCB: ø 1.4 mm
RATINGS
| Current [A] | Voltage [V] | Group | AWG | Torque [Nm] | |
|---|---|---|---|---|---|
 | 15 | 300 | B | ||
| 10 | 300 | D | |||
 | 15 | 300 | B | ||
| 10 | 300 | D, E |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, grey, V-0
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 100°C
Solder pin: 1,0 x 1,0 mm; tin plated brass
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-5,00
- Pitch of 10 mm for larger clearance and creepage distances
- Other solder pin lengths on request
- Coding elements 120-K
- Connectors equipped with coding elements on request
