150-B-151 /-153
PCB Connector
Screw connection, dovetail version (only -153), double deck
DESCRIPTION
The PCB connectors 150-B-151 and 150-B-153 are designed as two-tier version with a pitch of 5 mm and are available with 4 or 6 poles. Due to the ample terminal space and the lift system, this PCB connector is particularly user-friendly. The lift system guarantees optimum wire protection even after several disconnections of one or multiple wires. The two-tier version provides high wiring density in a confined space. In order to simplify the assembly, the rear solder pins protrude farther from the housing than the front pins. The housing has lateral latching elements. The version ..-153 allows the customer to lock the 4 or 6 pole PCB connectors to longer terminal rows without pole loss. The ..-151 does not have this option, but it is available as PCB connector with larger pole numbers. The wire entrance is parallel to the PCB. The screws are captive.
GENERAL INFORMATION
Pitch: 5.00 mm
No. of poles: 4 + 6
Additional information: Ordering information:..-151: Front PCB connector is offset to the right..-153: Front PCB connector is offset to the left
TECHNICAL DATA
Clamping Range:
0.14 - 4 mm² / 0.14 - 2.5 mm² / 26 - 14 AWG
Rated cross section: 2.5 mm²
Wire stripping length: 8 mm ± 0.5 mm
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
200 V
320 V
500 V
Rated Impulse Voltage
4 kV
4 kV
4 kV
Rated current: 24 A
Rated insulation voltage: 250 V acc. to EN 60998-1
Hole in PCB: ø 1.3 mm
Torque: 0.5 Nm
RATINGS
|
Current [A] |
Voltage [V] |
Group |
AWG |
Torque [Nm] |
|
|---|---|---|---|---|---|
|
20 | 300 | B | 22 - 10 | 0.51 [1] |
| 10 | 300 | D | 22 - 10 | 0.51 | |
|
300 | 20 | B | 26 - 10 | 0.51 |
| 10 | D, E | 26 - 10 | 0.51 |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, grey, V-0
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 100°C
Terminal body: Nickel plated brass
Pressure clamp: Copper alloy, tin plated
Screw: M3; zinc plated steel, blue passivated
Solder pin: 1,0 x 0,8 mm; copper alloy, tin plated
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-5,00
- Pitch of 10 mm for larger clearance and creepage distances
- Can be fitted together to larger pole numbers
