951-B-SV (-DS)
Plug Connector
Screw connection, with screw locking features
DESCRIPTION
The plug-in connector strip 951-B-SV in 5 mm pitch is available with 2 to 12 poles. Contrary to version 951-SV, the plug connector 951-B-SV has exterior mounting flanges and can be used in combination with version 971-FBS. Due to the small pitch, this plug connection requires only little mounting space and is therefore well suited for applications (i.e. low-voltage) where space is limited. For low voltage applications, the combination is safe-to-touch and should be mounted on an insulating pad. The wire protector of the “DS”-version reliably prevents damage to multi-wire flexible conductors by the turning screw.
GENERAL INFORMATION
Pitch: 5.00 mm
No. of poles: 2 - 12
Usable with: 971-FBS(-DS)
Application: Applications that require to easily open and close not energised circuits.
TECHNICAL DATA
Clamping Range:
without wire protector
with wire protector:
Rated cross section: 1.5 mm²
Wire stripping length: 5 mm ± 0.5 mm
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
160 V (80V)
160 V
320 V
Rated Impulse Voltage
2.5 kV
2.5 kV
2.5 kV
Rated current: 6 A
Rated insulation voltage: 130 V acc. to EN 60998-1
Torque: 0.4 Nm
Other specifications: Rated values in parentheses apply to use without insulated substrates. 2-8 poles types are "no-flame" acc. to glow-wire test.
RATINGS
|
Current [A] |
Voltage [V] |
Group |
AWG |
Torque [Nm] |
|
|---|---|---|---|---|---|
|
7 | 300 | B | 26 - 14 | 0.4 |
|
7 | 300 | B | 26 - 14 | 0.4 |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, grey, V-0
Comparative tracking index: 2-8 poles: CTI ≥ 600; 9-12 poles: CTI 400
Insulating group: 2-8 poles: I; 9-12 poles: II
Temperature range: -40°C up to 100°C
Terminal body: Tin plated brass
Screw: M2.6; zinc plated steel, blue passivated
Wire protector: Tin plated tin bronze
OPTIONS / ACCESSORIES
- CN: Consecutive Numbering
- SM: Special Marking (please provide sketch)
- G05: Gold Plating (5 micro inches)
- G30: Gold Plating (30 micro inches)
- S30: Silver Plating (30 micro inches)
- BS: Copper alloy (brass) screw
- Self-Adhesive marking strip BST-5.00
- 970-J1, Jumper
STANDARD CONFIGURATIONS
| Poles | Items | Part # | Items | Part # | Length L [mm] | Step | 3D PDF |
|---|
