115-F-211
Plug Connector
Screw connection, with snap-in base, for ø 1.3mm pin pinstrips
DESCRIPTION
The plug connectors of this series were particularly designed for applications where space is limited. However, they offer generous terminal space despite their small dimensions. Equipped with lift-system screw terminals, this plug connector guarantees highest clamping safety over many years. Plug connector version 115-F-211 has a snap-on foot and is designed for appropriately shaped base plates. PCBs are usually connected with the pin strips from above.
GENERAL INFORMATION
Pitch: 5.00 mm
No. of poles: 2 - 12
Usable with: plugs with ø 1.3 mm pin 971-SLR series
Application: Building and telecommunication technology, particularly for mass-production applications where space is limited.
TECHNICAL DATA
Clamping Range:
0.14 - 2.5 mm² / 0.14 - 1.5 mm² / 26 - 14 AWG
Rated cross section: 1.5 mm²
Wire stripping length: 6 mm ± 0.5 mm
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
250 V
320 V
630 V
Rated Impulse Voltage
4 kV
4 kV
4 kV
Rated current: 10 A
Rated insulation voltage: 250 V acc. to EN 60998-1
Torque: 0.5 Nm
RATINGS
| Current [A] | Voltage [V] | Group | AWG | Torque [Nm] | |
|---|---|---|---|---|---|
 | 300 | 12 | B | 26 - 14 | 0.23 |
| 0 - 10 | 300 | D | 26 - 14 | 0.23 | |
 | 12 | 300 | B | 26 - 14 | 0.22 |
| 10 | 300 | D, E | 26 - 14 | 0.22 |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, grey, V-0
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 100°C
Terminal body: Nickel plated brass
Spring: Copper alloy, tin plated
Pressure clamp: Copper alloy, tin plated
Screw: M3; zinc plated steel, blue passivated
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-5,00
