110-M-215
Header
Horizontal plug-in with anchors
DESCRIPTION
The pin strip 110-M-215 with connecting flanges and a pitch of 3,5 mm is available in 2- to 22-pole design. The plug direction for mating plug connectors is for this version parallel to the PC board. For its small dimensions it offers remarkable connection data (160 V-III-3 / 8 A). The connecting flanges on both housing sides are equipped with M2,5 thread inserts (<0,3 nm). the corresponding plug connectors in connecting flange design feature lateral screws which offer vibration-proof screw-connection of connector and also prevent unintended loosening. for each pole, pin strip has one trapezoidal coding slot elements 120-k can be inserted.
GENERAL INFORMATION
TECHNICAL DATA
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
160 V
160 V
320 V
Rated Impulse Voltage
2.5 kV
2.5 kV
2.5 kV
Rated current: 8 A
Rated insulation voltage: 130 V acc. to EN 60998-1
Hole in PCB: ø 1.3 mm
RATINGS
| Current [A] | Voltage [V] | Group | AWG | Torque [Nm] | |
|---|---|---|---|---|---|
 | 8 | 300 | B, D | ||
 | 8 | 300 | B |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, grey, V-0
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 100°C
Solder pin: 0,8 x 0,8 mm; tin plated brass
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-3,50
- Pitch of 7 mm for larger clearance and creepage distances
- Coding elements 120-K
