141-A-121
PCB Connector
Screw connection, vertical wire entry, dovetail version
DESCRIPTION
The PCB connector 141-A-121 with lift system is the horizontal version of 141-A-111 with a pitch of 5,08 mm and available in 2 and 3 pole design. Lateral latching elements on the housing allow to lock the PCB connector to longer terminal rows without pole loss. The wire entrance is vertical to the PCB. The screws are captive.
GENERAL INFORMATION
Pitch: 5.08 mm
No. of poles: 2 + 3
TECHNICAL DATA
Clamping Range:
0.14 - 2.5 mm² / 0.14 - 1.5 mm² / 26 - 14 AWG
Rated cross section: 1.5 mm²
Wire stripping length: 6 mm ± 0.5 mm
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
200 V
320 V
500 V
Rated Impulse Voltage
4 kV
4 kV
4 kV
Rated current: 16 A
Rated insulation voltage: 250 V acc. to EN 60998-1
Hole in PCB: ø 1.2 mm
Torque: 0.5 Nm
RATINGS
|
Current [A] |
Voltage [V] |
Group |
AWG |
Torque [Nm] |
|
|---|---|---|---|---|---|
|
10 [1] | 300 | B, D | 30 - 14 | 0.51 |
|
15 | 300 | B | 30 - 14 | 0.51 |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, grey, V-0
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 100°C
Terminal body: Nickel plated brass
Pressure clamp: Tin plated tin bronze
Screw: M3; zinc plated steel, blue passivated
Solder pin: 0,9 x 0,5 mm; tin plated tin bronze
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-5,08
- Pitch of 10,16 mm for larger clearance and creepage distances
