145-A-111
PCB Connector
Screw connection, dovetail version
DESCRIPTION
The PCB connector 145-A-111 with lift system is designed as single-tier basic version with a pitch of 5 mm and is available with 2 to 24 poles. Lateral latching elements on the housing allow to connect the PCB connector to longer terminal strips without pole loss. The wire entrance is parallel to the PCB. The screws are captive.
GENERAL INFORMATION
Pitch: 5.00 mm
No. of poles: 2 - 24
TECHNICAL DATA
Clamping Range:
0.14 - 4 mm² / 0.14 - 2.5 mm² / 26 - 14 AWG
Rated cross section: 2.5 mm²
Wire stripping length: 7 mm ± 0.5 mm
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
250 V
320 V
630 V
Rated Impulse Voltage
4 kV
4 kV
4 kV
Rated current: 24 A
Rated insulation voltage: 250 V acc. to EN 60998-1
Hole in PCB: ø 1.4 mm
Torque: 0.5 Nm
RATINGS
|
Current [A] |
Voltage [V] |
Group |
AWG |
Torque [Nm] |
|
|---|---|---|---|---|---|
|
20 | 300 | B | 26 - 12 | 0.51 |
| 10 | 300 | D | 26 - 12 | 0.51 | |
|
300 | 20 | B | 26 - 12 | 0.51 |
| 10 | D, E | 26 - 12 | 0.51 |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, grey, V-0
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 100°C
Terminal body: Nickel plated brass
Pressure clamp: Copper alloy, tin plated
Screw: M3; zinc plated steel, blue passivated
Solder pin: 1,0 x 0,8 mm; copper alloy, tin plated
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-5,00
- Pitch of 10 mm for larger clearance and creepage distances
