210-A-SMD
PCB Connector for SMD
Screw connection, with mounting peg
DESCRIPTION
The PCB connectors for surface mounting comprise several types for reflow processes. The SMD connector 210-A-SMD with a pitch of 3,5 mm is designed with screw connections in elevator clamping style and available in 2 to 12 pole design. The terminal clamp and the soldering tag are manufactured as a single unit and permanently engaged in the housing. The solder pins are exactly aligned parallel to the printed circuit board in order to create a coplanar connection after the reflow soldering process. The moulding is made of heat resistant thermoplastic material and equipped with plastic pegs on both sides to prevent twisting. The use of a strain relief is recommended. This article is only available in tubes or in Tape-on-Reel.
GENERAL INFORMATION
Pitch: 3.50 mm
No. of poles: 2 - 12
TECHNICAL DATA
Clamping Range:
0.14 - 1.5 mm² / 0.14 - 1.5 mm² / 30 - 16 AWG
Rated cross section: 1 mm²
Wire stripping length: 5.5 mm ± 0.5 mm
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
160 V
160 V
320 V
Rated Impulse Voltage
2.5 kV
2.5 kV
2.5 kV
Rated current: 12.5 A
Soldering Process: Reflow solder
Rated insulation voltage: 130 V acc. to EN 60998-1
Torque: 0.2 Nm
RATINGS
|
Current [A] |
Voltage [V] |
Group |
AWG |
Torque [Nm] |
|
|---|---|---|---|---|---|
|
10 | 300 | B | 30 - 16 | 0.23 |
|
10 | 300 | B | 30 - 16 | 0.22 |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA HT, black, V-0
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 120°C; reflow solder temperature peak max. 255°C acc. to DIN EN 61760-1
Terminal body: Nickel plated brass
Pressure clamp: Copper alloy, tin plated
Screw: M2; Copper alloy, tin plated
Solder pin: Copper alloy, tin plated
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-3,50 [1]
