408-50-4.8 /-6.3
Insulated Tab Terminal Strip
Housing width 50 mm
DESCRIPTION
Tab connector blocks 408-50 with double connectors on both sides are used mainly as connectors, lead distributors or as electrical interface in equipment and motor vehicles. Depending on the application, these connector blocks with a housing width of 50 mm are available for 4,8; 6,3 or XBS-tabs in 1- to 12-pole design. Except for pitch and total length this variant is compliant with DIN 72586-C50. These tab connectors are suitable for tab receptacles according to DIN 46247. The crimp points of tab receptacles are completely insulated.
GENERAL INFORMATION
Pitch: 12.50 mm
No. of poles: 1 - 12
TECHNICAL DATA
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
500 V
630 V
1000 V
Rated Impulse Voltage
6 kV
6 kV
6 kV
Rated current: 6 A: with receptacle 2.8; wire 1 mm² (16 AWG)16 A: with receptacle 4.8; wire 2.5 mm² (14 AWG)25 A: with receptacle 6.3; wire 6.0 mm² (10 AWG)
Rated insulation voltage: 750 V acc. to EN 60998-1
Other specifications: Rated values apply to use without insulated substrates.
RATINGS
| Current [A] | Voltage [V] | Group | AWG | Torque [Nm] | |
|---|---|---|---|---|---|
 | 25 | 600 | B,C | max. 10 | [1] |
| 15 | 600 | B,C | max. 14 | [2] | |
 | 25 | 600 | B,C | max. 10 | [1] |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, natural, V-2 (PA, white, V-0)Details in brackets apply for "no flame" products
Comparative tracking index: CTI ≥ 600
Temperature range: -40°C up to 100°C
Tab: Nickel plated brass
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- G30: Gold Plating (30 micro inches)
