930-FL (-DS)
Plug connector
Screw connection
DESCRIPTION
The plug connector 930-FL is designed for the insertion of pin strips 931-SLR-THR-1,1 or 931-SLR-SMD-1,1 both from the top and the bottom. The possibility to plug from either side allows mounting in reverse order: the plug connector can be pre-assembled in a housing and then the PC board can be slotted in from above. When using pin strips with extra-long pins (available upon request), two plug connectors can be mounted one on top of the other (stacked) thus achieving a parallel connection.
GENERAL INFORMATION
Pitch: 3.50 mm
No. of poles: 2 - 24
Usable with: pin strips of 931-SLR-THR-1.1; 931-SLR-SMD-1.1 series; 931-FST series
TECHNICAL DATA
Clamping Range:
without wire protector
with wire protector:
Rated cross section: 0.75 mm²
Wire stripping length: 5 mm ± 0.5 mm
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
160 V
160 V
320 V
Rated Impulse Voltage
2.5 kV
2.5 kV
2.5 kV
Rated current: 6 A
Rated insulation voltage: 130 V acc. to EN 60998-1
Torque: 0.2 Nm
RATINGS
|
Current [A] |
Voltage [V] |
Group |
AWG |
Torque [Nm] |
|
|---|---|---|---|---|---|
|
6 | 300 | B | 30 - 18 | 0.23 |
|
6 | 300 | B | 30 - 18 | 0.2 |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, grey, V-0
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 100°C
Terminal body: Nickle plated brass
Spring: Tin plated tin bronze
Screw: M2; zinc plated steel, blue passivated.
Wire protector: German silver
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-3,50
- Pitch of 7 mm for larger clearance and creepage distances
