950-FL-DS
Plug Connector
Screw connection
DESCRIPTION
The plug connector 950-FL-DS is designed to be joined with pin strips of the series 971 from either the top or the bottom side. Through the use of oversized pins (available upon request) a parallel connection can be made with stacked connectors. Among other things these plug connector, which produced with a nominal centre to centre spacing can be placed adjacently on pin strips without pole loss. The use of these components provides also a number of other advantages such as ease of isolation for service, the decentralized production of components or the ease of connection in confined space.
GENERAL INFORMATION
TECHNICAL DATA
Clamping Range:
0.34 - 2.5 mm² / 0.34 - 1.5 mm² / 22 - 14 AWG
Rated cross section: 1.5 mm²
Wire stripping length: 6 mm ± 0.5 mm
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
320 V
320 V
630 V
Rated Impulse Voltage
4 kV
4 kV
4 kV
Rated current: 6 A
Rated insulation voltage: 250 V acc. to EN 60998-1
Torque: 0.4 Nm
Other specifications: 2-12 poles types are "no-flame" acc. to glow-wire test.
RATINGS
|
Current [A] |
Voltage [V] |
Group |
AWG |
Torque [Nm] |
|
|---|---|---|---|---|---|
|
10 | 300 | B | 26 - 14 | 0.4 |
|
10 | 300 | B | 26 - 14 | 0.4 |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, grey, V-0
Comparative tracking index: 2-12 poles: CTI ≥ 600; 13-2 4 poles: CTI 400
Insulating group: 2-12 poles: I; 13-24 poles: II
Temperature range: -40°C up to 100°C
Terminal body: Nickel plated brass
Spring: Tin plated tin bronze
Screw: M2.6; zinc plated steel, blue passivated
Wire protector: Tin plated tin bronze
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-5,00
- Pitch of 10 mm for larger clearance and creepage distances
