982-W
Barrier Strip Connector
Screw connection, vertical wire entry
DESCRIPTION
The PCB screw connector 982-W in 9.52 mm pitch is available with 2- to 26-pole design and can be mounted side-by-side in the nominal pitch. This version is equipped with one solder pin per pole. The conductor terminal, located vertical to the PCB, is of head contact design, whereby the screws and square washers are movably connected. For easier connection, the non-rotably mounted square washers are automatically lifted when the screw is loosened.
GENERAL INFORMATION
Pitch: 9.52 mm
No. of poles: 2 - 26
TECHNICAL DATA
Clamping Range:
0.75 - 2.5 mm² / 0.75 - 2.5 mm² / 18 - 12 AWG
Rated cross section: 2.5 mm²
Wire stripping length: 8.5 mm
Over Voltage Category
III
Pollution Severity Level
3
Rated Voltage
320 V
Rated Impulse Voltage
4 kV
Rated current: 15 A
Rated insulation voltage: 450 V acc. to EN 60998-1
Hole in PCB: ø 1.6 mm
Torque: 0.8 Nm
Other specifications: Per pole two conductors of identical cross-section can be connected.
RATINGS
|
Current [A] |
Voltage [V] |
Group |
AWG |
Torque [Nm] |
|
|---|---|---|---|---|---|
|
20 | 300 | B | 20 - 12 | 0.79 |
|
20 | 300 | B | 20 - 12 | 0.79 |
| 10 | 300 | D, E | 20 - 12 | 0.79 |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, grey, V-0
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 100°C
Pressure clamp: Tin plated brass
Screw: M3,5; zinc plated steel, blue passivated
Solder pin: 0,8 x 1,0 mm; tin plated brass
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- Crosshead screws
- Cover cap 982-A
- Securing pins BEF-983
- Tab connections
