302-FB (-DS)
Plug-In Terminal Strip
Screw connection & socket with clamping spring
DESCRIPTION
The plug-in connector strip 302-FB is available in 8 mm pitch with 2 to 12 poles. It is well suited for applications where space is limited. It has one screw connection per pole and one plug-in connection for a terminal strip with pins. Plug-in terminal strips 302-SV or 302-SVG create a plug connection where both lead terminals are located parallel to the PCB. The contact pressure is applied by a stainless-steel spring. The wire protector of the “DS”-version reliably prevents damage to multi-wire flexible conductors by the turning screw. These terminals strips can be screw-mounted on a substrate.
GENERAL INFORMATION
Pitch: 8.00 mm
No. of poles: 2 - 12
Usable with: 302-SV(-DS), 302-SVG
Application: Applications that require to easily open and close not energised circuits.
TECHNICAL DATA
Clamping Range:
without wire protector
with wire protector:
Rated cross section: 1.5 mm²
Wire stripping length: 5 mm ± 0.5 mm
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
160 V
160 V
320 V
Rated Impulse Voltage
2.5 kV
2.5 kV
2.5 kV
Rated current: 6 A
Rated insulation voltage: 130 V acc. to EN 60998-1
Torque: 0.4 Nm
Other specifications: Rated values apply to use in combination with 302-SV(-DS) and without insulated substrates.
RATINGS
|
Current [A] |
Voltage [V] |
Group |
AWG |
Torque [Nm] |
|
|---|---|---|---|---|---|
|
6 | 300 | B,D | 20 - 14 | 0.4 [1] |
|
6 | 300 | B,D,E | 26 - 12 | 0.4 [1] |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, natural, V-2
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 100°C
Terminal body: Nickel plated brass
Spring: Stainless steel strip
Screw: M2.6; zinc plated steel, blue passivated
Wire protector: Tin plated brass
OPTIONS / ACCESSORIES
- Marking options on the screw guides
- Marking strips BST-302
- Jumper 302-J
- Moulding made of special polyamide for e.g. household appliances
