327-FU (-HDS)
Eurostyle Terminal Strip
Screw connection, with elevated base
DESCRIPTION
The socket terminal strip 327-FU with raised base and a pitch of 14,5 mm is available in 1 to 12 pole design. The raised base extends the creepage distance to the ground which allows 600 V in accordance with UL and CSA regulations without an additional insulating base. One fixing hole is located between every two poles. The flexible polyamide moulding can even be mounted on curved surfaces. The wire protector of the “HDS”-version reliably prevents damage to multi-wire flexible conductors by the turning screw.
GENERAL INFORMATION
Pitch: 14.50 mm
No. of poles: 1 - 12
Application: For lighting applications and similar electrical equipment.
TECHNICAL DATA
Clamping Range:
without wire protector
with wire protector:
Rated cross section: 16 mm² [1]
Wire stripping length: 9 mm ± 1 mm
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
1000 V
1000 V
1000 V
Rated Impulse Voltage
8 kV
8 kV
6 kV
Rated current: 76 A
Rated insulation voltage: 750 V acc. to EN 60998-1
Torque: 2 Nm
RATINGS
Current [A] | Voltage [V] | Group | AWG | Torque [Nm] | |
---|---|---|---|---|---|
| 65 | 600 | B,C | 14 - 6 | 1.8 |
| 80 | 600 | B,C,D,E | 14 - 6 | 1.8 |
Current [A] | Voltage [V] | Cross Section [mm2] | AWG | TORQUE | |
---|---|---|---|---|---|
| 76 | 750 | 16 |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, white, V-0
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 100°C
Terminal body: Nickel plated brass
Screw: M5; zinc plated steel, blue passivated
Wire protector: Stainless steel strip
OPTIONS / ACCESSORIES
- Marking options on and between the screw guides
- Marking strips BST-327
- Jumper 327-J
- G30: Gold Plating (30 micro inches)