974-T (-DS)
PCB Connector
Screw connection, 45° wire entry, dovetail version
DESCRIPTION
The PCB connector 974-T, inclined version with a pitch of 5 mm is available in 2 and 3 pole design. Lateral latching elements on the housing allow to latch the PCB connector to longer terminal strips without pole loss. The wire entrance is in a 45° angle diagonal to the PC board. Therefore, this PCB connector is ideal for the assembly in the centre of PCBs. The design of this PCB connector allows space-saving arrangement of consecutive rows of terminals. Wire protection in DS-design reliably prevents damage to stranded wires by the screw.
GENERAL INFORMATION
Pitch: 5.00 mm
No. of poles: 2 + 3
TECHNICAL DATA
Clamping Range:
without wire protector
with wire protector:
Rated cross section: 2.5 mm²
Wire stripping length: 6.5 mm ± 0.5 mm
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
250 V
320 V
630 V
Rated Impulse Voltage
4 kV
4 kV
4 kV
Rated current: 24 A
Hole in PCB: ø 1.3 mm
Torque: 0.5 Nm
RATINGS
| Current [A] | Voltage [V] | Group | AWG | Torque [Nm] | |
|---|---|---|---|---|---|
 | 20 | 300 | B | 22-12 [1] | 0.51 |
| 10 | 300 | D | 22-12 [1] | 0.51 | |
 | 20 | 300 | B | 26 - 12 | 0.51 |
| 10 | 300 | D, E | 26 - 12 | 0.51 |
| Current [A] | Voltage [V] | Cross Section [mm2] | AWG | TORQUE | |
|---|---|---|---|---|---|
 | 24 | 250 | 2.5 |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, grey, V-0
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 100°C
Terminal body: Tin plated brass
Screw: M3; zinc plated steel, clear passivated
Solder pin: ø 1 mm; tin plated copper
Wire protector: Tin plated tin bronze
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-5,00
- Longer solder pins up to 75 mm
- Special wire protector for very thin conductors
