Screw connection, 45° wire entry, dovetail version
The PCB connector 974-T, inclined version with a pitch of 5 mm is available in 2 and 3 pole design. Lateral latching elements on the housing allow to latch the PCB connector to longer terminal strips without pole loss. The wire entrance is in a 45° angle diagonal to the PC board. Therefore, this PCB connector is ideal for the assembly in the centre of PCBs. The design of this PCB connector allows space-saving arrangement of consecutive rows of terminals. Wire protection in DS-design reliably prevents damage to stranded wires by the screw.
Pitch: 5.00 mm
No. of poles: 2 + 3
without wire protector
with wire protector:
Rated cross section: 2.5 mm²
Wire stripping length: 6.5 mm ± 0.5 mm
Over Voltage Category
Pollution Severity Level
Rated Impulse Voltage
Rated current: 24 A
Hole in PCB: ø 1.3 mm
Torque: 0.5 Nm
|20||300||B||26 - 12||0.51|
|10||300||D, E||26 - 12||0.51|
Moulding: PA, grey, V-0
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 100°C
Terminal body: Tin plated brass
Screw: M3; zinc plated steel, clear passivated
Solder pin: ø 1 mm; tin plated copper
Wire protector: Tin plated tin bronze
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-5,00
- Longer solder pins up to 75 mm
- Special wire protector for very thin conductors
We are sorry that this post was not useful for you!
Let us improve this post!
Tell us how we can improve this post?