110-M-225
Header
Vertical plug-in with anchors
DESCRIPTION
The pin strip 110-M-225 with connecting flanges and a pitch of 3,5 mm is available in 2- to 22-pole design. The plug direction for mating plug connectors is for this version vertical to the PC board. For its small dimensions it offers remarkable connection data (160 V-III-3 / 8 A). The connecting flanges on both housing sides are equipped with M2,5 thread inserts (<0,3 nm). the corresponding plug connectors in connecting flange design feature lateral screws which offer vibration-proof screw-connection of connector and also prevent unintended loosening. addition, pin strip can be attached to housing walls with (not included delivery extent). for each pole, has one trapezoidal coding slot elements 120-k inserted.
GENERAL INFORMATION
TECHNICAL DATA
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
160 V
160 V
320 V
Rated Impulse Voltage
2.5 kV
2.5 kV
2.5 kV
Rated current: 8 A
Rated insulation voltage: 130 V acc. to EN 60998-1
Hole in PCB: ø 1.3 mm
RATINGS
| Current [A] | Voltage [V] | Group | AWG | Torque [Nm] | |
|---|---|---|---|---|---|
 | 8 | 300 | B, D | ||
 | 8 | 300 | B |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, grey, V-0
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 100°C
Solder pin: 0,8 x 0,8 mm; tin plated brass
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-3,50
- Pitch of 7 mm for larger clearance and creepage distances
- Coding elements 120-K
