120-M-221-THR
Header
Vertical plug-in, with side walls
DESCRIPTION
The products based on our established 120-M series (conecta) have been designed for the soldering process in Through-Hole-Reflow technology. The soldering paste is applied to the plated through holes and the pins are placed in the circuit board and soldered by a reflow oven. The terminal mouldings are made of heat-resistant material. The stand-offs on the base ensures there is enough room for the soldering paste and facilitates good heat circulation for optimum soldering and enables the soldering joint to be visually inspected. The solder pin projects very slightly with a circuit board thickness of 1,6 mm, creates a solder point on both sides, and thus guarantees a secure mounting. The position of the solder pins enables an equally minimal allocation area on the circuit board as with wave soldering. The 120-M-THR pin strips are, like the conventional products, available with straight or angled soldering pins for vertical or parallel plugging of the mating parts, whereby all plugs of the conecta series 120-A, -D, and -F can be used.
GENERAL INFORMATION
Pitch: 5.00 mm
No. of poles: 2 - 12
Usable with: plug with 120-A-111, 120-D-111, 121 series
Additional information: For the automatic assembling process. all pin strip versions are packed Tape-on-Reel and are equipped with high temperature resistant Pick Caps. which can comfortably be removed after the soldering process.
TECHNICAL DATA
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
250 V
320 V
630 V
Rated Impulse Voltage
4 kV
4 kV
4 kV
Rated current: 12 A
Soldering Process: Wave solder & reflow solder
Rated insulation voltage: 250 V acc. to EN 60998-1
Hole in PCB: ø 1.5 mm
RATINGS
|
Current [A] |
Voltage [V] |
Group |
AWG |
Torque [Nm] |
|
|---|---|---|---|---|---|
|
15 | 300 | B | ||
| 10 | 300 | D | |||
|
15 | 300 | B | ||
| 10 | 300 | D, E |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA HT, black, V-0
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 120°C; reflow solder temperature peak max. 255°C acc. to DIN EN 61760-1
Solder pin: 1,0 x 1,0 mm; tin plated brass
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-5,00 [1]
