140-A-111-THR
PCB Connector for THR
Screw connection, short solder pins
DESCRIPTION
The PCB connector 140-A-111-THR with a pitch of 5 mm, designed for the soldering process in Through-Hole-Reflow technology, is available in 2- to 12-pole design. The very short 1.5 mm solder pins, no longer protruding from the PC board, allow for double-sided mounting possibilities. The terminal housing is made of heat-resistant material. The wire entrance is parallel to the PCB. The screws are captive.
GENERAL INFORMATION
Pitch: 5.00 mm
No. of poles: 2 - 12
TECHNICAL DATA
Clamping Range:
0.14 - 2.5 mm² / 0.14 - 1.5 mm² / 26 - 16 AWG
Rated cross section: 1.5 mm²
Wire stripping length: 6 mm ± 0.5 mm
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
200 V
320 V
500 V
Rated Impulse Voltage
4 kV
4 kV
4 kV
Rated current: 16 A
Soldering Process: Reflow solder
Rated insulation voltage: 250 V accord. to EN 60998-1
Hole in PCB: ø 1.3 mm
Torque: 0.5 Nm
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA HT, black, V-0
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 120°C; reflow solder temperature peak max. 255°C acc. to DIN EN 61760-1
Terminal body: Nickel plated brass
Pressure clamp: Tin plated copper alloy
Screw: M3; Zinc plated steel, blue passivated
Solder pin: 0,9 x 0,5 mm; tin plated copper alloy
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-5,00 [1]
- Pitch of 10 mm for larger clearance and creepage distances
- Tape-on-Reel on request
- Other solder pin lengths on request
